[Wii2hdmi Original XBox Hdmi Diagram Wiring Schematic - Component To Hdmi]

18 hours ago, SS_Dave said:

A quick test with a multi meter here tells me they are the Left and Right audio signal so they must have been there unless it was digital audio only cable(unlikely).

You could relocate the pins from the Digital audio out and 1 of the audio grounds to the 2 missing pins.

 

 

Cheers

SS Dave

Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

Thank you so much Dave for taking the time to help me! 

So in other words you are saying that I could use Digital audio out as a replacement for those two missing pins? Would it work as follows: 

I should connect Digital audio out (number 6 in this attached pic) to Wii2HDMI board point R "Front red" 

I should ALSO connect ANOTHER wire from Digital audio out to point L bottom white?

I should also connect Right and Left Audio Grounds in a normal manner from point 4 to G and from point 5 to G.  

[Wii2hdmi Original XBox Hdmi Diagram Wiring Schematic - Component To Hdmi]

Looks to me that pins 1 and 14 (Retro Franks numbers in his pic) are missing from this cable end from European original Xbox cable. 

[Wii2hdmi Original XBox Hdmi Diagram Wiring Schematic - Component To Hdmi]

Hey all! Just begun the work to make an adapter for my modded PAL Xbox. Found out that the original RCA cable to Xbox does not have 24 pins in total (12top+12bottom). Instead it has 11+11. s there a way to use this version of the connection block?

If not, I guess I have to search and order a cheap cable and use that instead? Do you have any suggestions on which cable to order for donor? Thanks?

[Pulling Clock Cap From Crystal XBoX.]

Thanks for the initial question and helpful confirmation that it is indeed 1.4 with the cap. I have similar device and will remove the cap too  

[Surreal64 Problems, Please Help a Noob Out.]

On 2/23/2020 at 3:07 PM, MortalCrow said:

As far as I know, you should use Earthworm James Rom Pack. But I have uploaded my own romset and ran into the same problem. To generate the list with the script you have to modify it a little.

Open create_rom_lists.py and insert a new line at position 911 before "pDialog.update(..." :

N64_Rom_Name = Rom_Name_noext

Now at least the script runs thru and generates the gamelist with your romnames from the filenames.

create_rom_lists.py 76.12 kB · 50 downloads

Thank you! This makes so much sense

[Surreal64 Problems, Please Help a Noob Out.]

Hi, 
I am facing similar issue with Surreal64 and XMBC Emustation. When trying to update N64 in Emustation I receive message "Error script failed! : create_rom_lists.py". 

• I have XBMC Emustation version 1.2.123
• I downloaded Surreal64 using the Emustation Downloader. 
• I FTP'd two roms in zip format to emustation\roms\n64\
• I can launch Surreal64 using the File Explorer and choosing Surreal64 emulator folder and default.xbe. I see both of those two game roms and can play both. 

What check my setup is failing and how could I get N64 updated to Emustation?

[Boot Up Hang Up]

Just wanted to thank you. I found this very useful with my challenges

[Made a HeXEn 2018 Update]

As a new member here, I would like to say humble thank you. Much appreciated!

[XBox Clean Up]

Impressive how tidy you got everything cleaned in such a short time. 

[New Here Need 5 Posts for the Hexen Disk Download.]

Hi there, 

I share your enthusiasm with the project. Also found my Xbox again this autumn and got the fever to make most of it. Couldnt walk past bargain deal on two other OG Xboxes so now I have three consoles to play with for a few weekend projects. 

[Noobs Guide Tutorials (N.G.T)]

This seems very valuable. Thank you!