-
Posts
837 -
Joined
-
Last visited
-
Days Won
11
Content Type
Profiles
Forums
Calendar
Store
Posts posted by Ging3rguy
-
-
You need to load your chosen bios to your hdd, then when in the xenium flash menu navigate to the bios file on your hdd.
-
Thanks for the info, been using some sony disks and they seem a bit hit and miss.
-
Hi, what disks are best for making a copy of the HeXEn disk and what software and burn speed would you recommend?
Thanks
-
It sounds like a overheating or hardware failure but that is normally a solid red led. Stupid question but the fan is sucking in not blowing out?
-
Thanks, I'll give it a try.
-
I just made the F partition bigger and ditched the G partition.
-
Hiya, just TSOPed my 1.2v Oxbox and put in a 160gb hdd. I split the F & G partitions 74ish gb each.
The F partition show 74ish gb but G partion is 0gb.
Used HeXEn 18 and the evox M8+ bios F+G, Both F & G values showed in XBpartitioner 1.3.
-
Found this article that might be useful http://fillwithcoolblogname.blogspot.com/2011/02/1st-gen-xbox-trace-corrosion-repair.html
-
take a look at this https://www.reddit.com/r/originalxbox/wiki/chimp
-
You want to load the contents of Chimp to the Apps folder on your E partition. E:\Apps
-
I got lucky a bought a batch of 4 xboxs off of ebay and 1 had a X3 chip.
-
I believe that X2 4974 only supports up to 137gb, you also need to update LBA48 patch
- 1
-
Do you know which bios you are running, the one you have loaded my not support a larger drive?
-
Check the cable for any nicks or badly squashed areas that might cause a short or break.
-
As you have 2nd Xbox try swapping the IDE cable and see if it eliminates the problem
-
The guide worked fine for me, I installed a 2TB HDD, the only issue I found was that not all sata to ide boards work because of their size and transfer rate.
-
You can buy Aladdin clones on ebay.
-
I was hoping to use something like this. https://www.crystalfontz.com/product/cfah2002anygjtv-lcd-20x2-character-module
-
I believe I need a HD44780 compatible LCD either in 20x2 or 20x4, I think I prefer the 20x2 option as hopefully it will mean I can make a smaller hole.
-
Hiya, I have been lucky enough to pick up a Xbox with a X3 chip. Planning to add a 2TB HDD and LCD screen.
If anyone can point me to any good tutorials that would be great.
Thanks
Board Life Status
Board startup date: April 23, 2017 12:45:48
Install a X3 From the 1.6 Board To Install 1.0 Board
in Hardware Mods
Posted
Hi guys, why would you want to move the chip to a V1, is it a better box? Thanks