knat333

just checked the pins, all straight. moreover, error 9 happens only in master and slave modes. if i choose cs mode, there will be no error 9 but a stuck screen instead. so it is unlikely the pins are problematic.

i tried 3 jump modes: both master and slave lead to 09 error. cs mode lead to the stuck screen shown in my initial post. it's worth noting that at he bottom of the stuck screen, there is a white 'linux' logo, so the hexen is already running. the problem is the supposed message shown in figure 1 didn't appear, the screen stuck as figure 2

yes, i bought a new IDE HDD this week, produced almost 20 years ago, but it has never been unpacked and powered on until i got it this week, so although it is produced long ago, it's new

i have a hardmodded og xbox made in 2005 with a upgraded 120g hdd. the hdd is worn down recently and disk error ocuur from time to time. so i want to replace the hdd. i purchased a 120g IDE hdd made in 2000s, but it has never been used. i disconnet the old hdd and connect the new one to my console, drop the hexen 2018 disc into dvd drive, power on the console. it is supposed the hexen will detect the unpartitioned hdd and display something like this but actually, the screen is stuck at this: if i replace this new hdd with the old ones(both the original 8G HDD or the 120G HDD which i have used many years), the hexen UI can appear within 30 seconds, so it is unlikely that the hexen dvd is problematic. So what may be the cause of the stuck scrren when connected with the new HDD?