lightwish

Hello, it's me again, now bringing the port of Sonic CD to the Original Xbox. For it to work, you need to place the game assets in the same folder as the .xbe. There is more information on the github page. The next Retro Engine ports (v4 and v5) should take a little longer to come out, as I need to rest a little and focus on other points in my personal life, but I promise it won't take long to return with the ports. https://github.com/danielgpinheiro/RSDKv3-xbox

Thanks guys!! Next port (Sonic CD, RSDKv3) come I believe next week!! Stay tuned!!

When I thought about the idea of starting ports for the Original Xbox, I had (and still have) the desire to port the decompilation of Sonic Mania (RSDKv5), but I saw that this would require an experience in ports that I don't have (yet). So I decided to go in baby steps, to gain experience, so I studied and made my first port for the Xbox, Celeste Classic (https://github.com/danielgpinheiro/ccleste-xbox) After this port done, where I learned a lot, I'm starting a series of Retro Engine ports, which will start from version 1 (which runs Sonic Nexus), next version 3 (Sonic CD 2011), version 4 (Sonic 1 and 2 2013), and version 5 (which runs Sonic Mania). The first port of this series is complete, which is the RSDKv1 for the Xbox, which runs the Sonic Nexus fan game. Who is interested, the link to the repository: https://github.com/danielgpinheiro/RSDKv1-xbox

I want doing more ports in future of course!! Thanks for appreciation!!

The problem is that I live in Brazil, shipping will be very expensive, but I will keep it for spare parts, such as PSU, daughterboard controller, front panel, etc. etc.

On the github page, on the right side there is the releases link, just click and download the .zip or .iso

I think OoT has the most difficult and demand port to Original Xbox, but not impossible.

My guess a damaged trace is causing this, but I give up this xbox, I have other one fully functional anyway.

Swapped the PSU, and nothing changes, same behavior.

I’ll try swapping psu to see the results, I come back later to report.

Cerbios and M8 plus

I'm not good at soldering, I had a lot of difficulty assembling the OGX_t4 On the Xbox-scene discord, they told me: just pull up the 2nd pin from the bottom on the temp sensor, and you’ll be good to go if it’s misreading data

Hmm, PSU overheating trigger this FRAG too? Because this xbox has FOXLINK PSU, maybe trying change the PSU with my other 1.0 Xbox with Delta PSU maybe works.

MIddle of operation, I turn on now with stock fan and same behavior!

Is it possible to save this xbox? It's 1.0, fully recapped, and recently every now and then this Xbox goes into that overheating mode, with the orange light, and no image, and stays like that until it turns off. The panel buttons do nothing during this. But it's not overheating, because on all dashboards, it stays between 44C and 50C (I'm using the Nemesis Dual Fan Kit). I imagine it's the Adm1032 Temperature Ic Fail... I've already tried cleaning the contacts with isopropyl alcohol to see if it solves it, but nothing. Is there a BIOS that ignores this sensor, or something in software? Or anything else I can do?