WhiteBeard

Congrats, you've made me paranoid

Someone bid on it at this price. Unless something falls though, please consider the control panel sold. If anyone wants to bid on the mod chip, I'm open to any offers. No minimum price. I'll make another post about selling it in a more appropriate place if it doesn't sell.

I will provide any proof requested, within reason. Btw, the last local paper just ended here, so I can't do today's paper.

Update: I just looked at the fees on eBay - Fuck that noise hard. 13.5% my ass. I'll have an Auction in this thread (if I'm allowed) Rules: Here's how I'll do it to make it fair to everyone: I'll have a silent Dutch auction that lasts for 3 days each time. I'll start with a high price and go lower. If more than 1 person bids in the 3 days, I'll sell to the highest bidder. I'll let all the bidders know if they won or lost only after the 3 day period. If nobody bids at that price in 3 days, I'll lower the price and go another 3 days. If you want to bid, send me a direct message (DM) with your bid that's equal to or higher than the listed price, you're payment method, and what you are bidding on. Bids are retractable in the 3 day period, but are locked in at the end. If you win, you win. Don't place any bids in this thread – they will be ignored. I'll accept Paypal (buyer has to pay the fee), interact e-transfer or cash (if local). This isn't exhaustive, if there's a method I don't know about ask me and I'll see if I can accommodate it. I'm Canadian, so I can't do Venmo, sorry. If you're unsure about how this works, ask in the thread for clarification. Price Justification: This post provides me with a general understanding of the value of these parts. While I don't anticipate receiving $800 and $200 for these items, I do require an initial price point. I plan to begin with highly optimistic figures on the initial period and gradually decrease from that point onward. Auction: First 3 day period: Midnight August 19th PST - to - Midnight August 22nd PST Starting Minimum bid for the Control Panel: $900 USD + S&H Starting Minimum bid for the Modchip: $250 USD + S&H Instructions: If you're interested in offering a bid that matches or surpasses these prices, please send me a DM. If you choose not to, you can wait for 3 days and hope that no one else places a bid during that time. Notes: As you can see in this thread, I am missing a couple cables, the solder guide and the header pins. I can give you header pins if you need them, but they aren't the originals. What you see is what you get. (Ignore the yellow cable). Shipping is from Vancouver Canada, I have instructions on this post as to calculate an upper bound for the shipping (it will probably be cheaper than that). Moderators: If this is against any rules; please inform me and I'll remove it asap and figure out some other way to sell them. I'm not trying to get in trouble, I'm just trying to be as fair to everyone as possible. You can also move this thread if you need/want to.

Thank you for your help with this. Ya, those small cables are gone. Like I said before, this has sat in a box for over a decade. I have no idea where any of those small cables are other than what's in that picture. Also, I could be wrong, but I don't think I ever had that solder guide, and melting those header pins was the thing that scared me off - so I know they're gone. I'll make a note of it in the auction.

Quick Question: If I separate this into 2 auctions, one for the mod chip and one for the faceplate - Which cables go with which thing? Also, what does this chip go with?

sorry, not yet. I'm going to sell a bunch of stuff on ebay and craigslist and I'm getting together a mini photo studio. I should be all set up for tomorrow and have it up tomorrow or the next day. Don't worry, I'll be putting the link up here as soon as I post it.

Here is what I'd be going with for shipping https://www.canadapost-postescanada.ca/cpc/en/tools/find-a-rate.page You use the address "1172-4700 Kingsway Burnaby V5H 4M1" - that's not very close to me, but it'll give you a good idea of the price. The package should be less than 15cm*15cm*45cm and less than 1.5kg, so you can use that as an upper bound for pricing. I'll get exact sizing and weight before posting the auction.

If you win the eBay auction - I don't mind filling out any paperwork or packing extra padding that's required for shipping internationally, as long as you don't mind paying the shipping and customs fees and waiting for it to get through customs.

Here is the chip that I got with it. Do you guys think it should be seperate auction or a package with the faceplate? Where are you approximately in the world?

Ok, finally. This is a new account so I'm locked down from posting too often (4/day I believe) Hey, mine is solar and radio controlled too! The end of my band cracked off, and it's cracking in another place. I contacted Casio, but they wanted me to send them $50 via putting my CC number into an unencrypted PDF so I'm stuck with the old band. I was just planning on putting it on eBay (probably this weekend). I have already gotten 2 DMs, and 2 people on this thread asking to buy it and I have no idea how much it can go for. Like I said, I'm not very big into this scene, I just got lucky a long time ago when I bought it. Nope, that's the original shipping box it came in. I'm in a suburb of Vancouver, Canada. I also have the never-installed X3 mod chip as well. I'll take a picture of it when I get home. I have no idea if that's desirable as well, though.

Another of my stupid, costly obsessions

Yes, that's what I'm talking about. I'm curious if there's still a market for it or not.

Here's proof of life, to prove I'm not just making shit up.

Hello, I have a transparent blue faceplate that I never installed on an xbox and was wondering if it was still worth anything, or if the market is no longer there. I was thinking about putting it on eBay soon, but I don't know anything about what to list it as or even if it's still worth my time to do. Backstory - My mom bought me a team xecuter chip and face plate over a decade ago, I tried to solder the header pins onto the jtag and melted the plastic on them. I freaked out because I worried that ruined something expensive (I was a dumb kid) and just stored everything. A couple years ago I made a computer case out of the XBOX case and found it in my xbox stuff. I looked it up and found it was desirable. Since then, my life has been one crazy thing after another; 2 jobs, moving, kid, covid, and I just haven't been able to carve out time to sell it. Thanks