[2tb XBmc Orgins]

It’s possibly your SATA IDE adaptor, buy a startech Or if you have the WD Green drive turn off head parking.

[TSOP splitting]

Add one more SPDT switch A18 and your Bios should split 4 ways into 256 banks as he states in the first pic as optional. 

[Ogx360]

3 hours ago, razor000999000 said:

How do I go about purchasing? 

Cheers. 

 

Send Tek Nemesis a personal message. He is in Alberta, Canada. Or Contact him via facebook. Look at Daves Post.

[Can you install a mod chip without that little board?]

 

[Can you install a mod chip without that little board?]

40 minutes ago, Logh3f82 said:

Are there any tutorials for that?

I wouldn't even know where to start.

 

[Can you install a mod chip without that little board?]

If you are referring it to the LPC Rebuild board, then yes. Its easier to just use wires. I used the LPC rebuild board once only and its a nightmare removing it if things do not go right. 

[2tb Origins install help]

The easiest way to Use this Utility is to download Ultimate Boot Disk. Follow this Tutorial and the link to download is also in the description.

 

[Replace 1.0 GPU fan with IGP heatsink?]

Hey I have a few 1.0 Xboxs with the fan on GPU. The fan on motor shaft is just held by magnet. You can pop of the fan very easily. I have put in a a drop of synthetic 0w20 motor oil in the bushing hole and snapped the fan back on. Never hear any sound from these fans anymore. They been running now for over a year and still no noise.

[Winbond TSOP Errors Out]

I don't have a answer to that question. Maybe Dave or Kaos can answer to that.

[Winbond TSOP Errors Out]

It works well if you have a fiber glass pen to scrub off the protective layer and then use flux to solder.

[Winbond TSOP Errors Out]

Here are few pics to help you find them. Use a low heat setting on the iron. Don't give up, once done soldering the alternate points try running the bios identifier tool again and see if it identifies the TSOP chip before flashing. 

[Winbond TSOP Errors Out]

Try running the Bios checker tool from the OGX Installer disk. If it Identifies your winbond chip that means your TSOP enable points are good. If its not Identifying try to Solder the alternative points.

[OG XBOX Blue 1.6v board installed aladdin chip 4032 at booting issue]

Also try to reflow the pinheader, and make sure the modchip is seated properly. I ran into that kind of problem myself with these cheap aladdin modchips as the female header on the chip does not always make a good contact. Use a bit of pressure with your hand on chip while booting and see if that helps.

[TruHeXEn 2021]

Thank you so much for the updated version and switching to Xblast for Sharp/Winbond TSOPs. It will be nice to see you and SweetDarkDestiny working together to accomplish one of the finest releases in the future.

[I end up tooking the rubberbelt off by mistake]

If its the DVD Tray eject belt as Kaos Mentioned, use a tweezer to put it back on. Put the belt on the big pully on the left side and then pull it with tweezers to slide onto the small pully. Pull out the DVD Tray all the out so you can see what you are doing and use some light. Good luck!

[Glad to see the community lives on]

Welcome to OGX!

[From softmod to Tsop, help please!]

2 hours ago, LuKa1987OR said:

I did... And it displays: Hynix (TSOP?)...SO I thought the joints were good!

Did you make a folder named BIOS in the root of C drive and put the bios file in there named as bios.bin ?

[From softmod to Tsop, help please!]

Try running the Bios Checker disk to make sure TSOP flash points are good. OGXBOX installer has the app in it as well.

[Need help how to softmod from hardmod and then TSOP flashing]

Just another precaution bridging those TSOP points is not as easy as it looks in the pictures, specially if you have never done this before. Those points are very tiny, Use some sort of magnifying glass and very low heat soldering iron with a fine tip. Tin a 30AWG wire and use that as point to point contact for soldering. Lifting traces is very common side effect of high heat soldering irons. I have been there and done that trace lifting on my first TSOP and bridging alternative points becomes another added task which is not easy either.

And thanks to Dave's Signature that gave me the encouragement and guts to do my first TSOP Flash

Good Luck!

[OGXBox Installer 2021]

Hey I checked out the new version of OGXBOX installer 1.5.0 today. Xblast flashed the winbond with the EVOX, Executer, and IND bios like a champ. Also flashed a Aladdin and DuoX2 with the same bios and it worked perfect. Next I will try setting up up stock and Larger HD and Install apps.

Thanks a lot again for all the effort you put in to this project.

[Hello from Sweden]

14 hours ago, Niclas said:

Hi all. I´m new here but not to the modding scene. Been modding consoles since the early days started around year 2000. Mostly Ps2 Wii Xbox Xbox360.

Have been digging up the chipstorage and done about 20 consolles the last few months.

Welcome to OGXBOX Niclas.

[Looking for a decent Chip for a 1.6b Board]

I recently ordered some Aladdin from Ebay for $11.64 CAN shipped. Works great and they come with pin header but only has one 256KB Flash. The other modchip you can use is the OpenXenium. Those I order from MAKEMHZ Retails around $20 US plus shipping, he also puts them up for sale around $16 once in while so keep visiting the site. Open Xenium has a 1MB Flash and you can have up to 4 bios flashed to it depending on size and it is all software controlled. These are also the easiest to flash.

[OGXBox Installer 2021]

Thanks again for the explanation and we all appreciate your dedication and hard work.

[OGXBox Installer 2021]

Thank you Sweetdarkdestiny! I am sure Xblast flasher will work better for all of us.

[Eurasia Web Site]

I would really appreciate too if someone here still has a link to the memory card download that they can share please.