chrisrlink
-
Posts
17 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Store
Posts posted by chrisrlink
-
-
@ nikeymikey heads up gdrive was finally taken down you're onedrive still works though
-
no i use fatxplorer which doesn't anyways I use BRU (bulk rename utility) with these settings
regex match (.{20}) replace /1
Remove from 49 (I just lowballed the number so the file name will only be 48 characters) to 999 and click the sym (symbol) checkbox which will remove symbols), also go to renaming options---->prevent duplicates then select all your files you want to rename and hit rename on the lower left corner,better yet Ill include my settings file just go to File and open load it and your ready to rename I hope that config file helps someone else out (also the program is freeware
-
1
-
-
so i have about 1k roms which file names are too long to be transfered to to character limit on fatx, how can i shorten the names (in bulk) without doing 1,000+ renames (also the xored mini trainer pack had the same issue not just as much of a pain (bout 5-6 etm's)
-
thanks for the mirror saves me the trouble of IRC+filezilla just to get the files,btw any modification required to cerbios.ini for insignia? or does it work oob?
-
nvm I did the dirty" tsop hack (conductive ink) and flashed latest cerbios
-
hi so as you may know my X2.6 chip for my 1.4 xbox is bricked I since got a jafar chip off ebay I snipped the plastic plug for my X2 off to expose the wires for solidering as far as i know i have 2 wires (one green one red) no i read on the github you can also "ground" D0 instead of soldering it, ground it to where a pin or what? trying to avoid solidering as much as possiable also used PiPROM to fetch my hdd key (this is a retail unit though im missing a dvd drive so it error 12's if all else fails i'll find a thompson at least to get ti up and running next month
-
still having this issue i get freezing/buzzing at the flubber logo with my hdd installed with everything correctly in place using the FatXplorer 3.0 beta to build/preload the drive and I have EVo bios installed too so hdd locking shouldn't be an issue i get a 07 (hdd time out) with no hdd installed (pretty obvious)
-
also how do I change my ip to static i got an out of range one for my network (192.168.100.10) .100 should be .0 instead
-
can't seem to setup my hdd Paths on UIX even if i do like F:\Games which has all my hdd ready games and reboot after saving the config it shows nothing under HDD---->Games same with apps which is set to F:/Apps I see that the quick menu uses double slashes do i do that? (even though i did try it same result) latest beta dl and using cerbios v2.2
-
think you can make a custom formatter on the disc to allow formatting for cerbios/titan drives 2TB<) ?
-
idk what I'm doing wrong EvoX boots it as unknown xbox disc then kicks back to evoX dash nor will it coldboot the disc (TSOP v1.1 box btw) freshly burned no scratches on disc at 4X speed could it be the fact their dvd +rw media?
-
it seems as 7 trainers their names are too long for FatX (Luckly all 7 were PAL region)
-
hi so I've been lurking a while and i came upon something on another forum i found nearly 3,000 etm trainers in a single zip which I'll attach or link below question is can mini read etm's if they are named <game Title>.etm ex Fable.etm or must they be named in that T<####> format i see bundled with Xored (the 1337 Trainers you can dl via the xbmc4gamers downloader)
Link is https://archive.org/compress/ETMTrainers
for those interested
-
sorry but it seems to not read on my tsop'd box fresh hdd
-
i'm getting an error on smartctl it will not open eeprom.bin to lock the drive
-
hi so I did the following steps so far
1)softmodded my 1.0 via SC PH
2) I used rocky5's tools to null the eeprom then extract the nulled eeprom backup to my gdrive
ok so now I have a sata hdd (Seagate 500GB) and a kingwin SATAtoIDE board knowing that it doesn't have a master/slave switch by best option is to use xboxhdm i have a question first is there a way to burn the iso to usb boot instead of by cd?
and i want hdm2.0 that supports sata drives correct?
thanks for your help
Board Life Status
Board startup date: April 23, 2017 12:45:48
coinops lite sunset adding new roms question
in Emulators
Posted
hi so rather that downloading the massive version i opted to add stuff to the lite version only problem is when i added say n64 or psx roms/isos to the correct folders it doesn't reflect in coinops what am i doing wrong?