[Back To Modding]

2 minutes ago, SS_Dave said:

And if you want it to boot straight to XBMC4Gamers

This one will boot directly to E::xbmc4gamers\default.xbe as dash 1

Then C;evoXdash.xbe as dash 2

 

evox_m8+67_NO-DVD-Gamers.bin 256 kB · 0 downloads

 

Cheers

SS Dave

Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

 

Awesome! Thank you!

[Back To Modding]

Awesome and that's what I will do to make life much easier!

I have been digging in this forums and don't see an obvious answer, what bios is advised to use with the 1.6?

Thank you! 

One of these 512k bios in the picture?

[Back To Modding]

Last question on this thread, do I need to lock the HDD and null it?

[Back To Modding]

Well, I just tried opening it and I made it! Finally have a dashboard. I'm sure this was way harder than it had to be. Thanks for all your help with this! I really do appreciate it. Now that I have all the tools I ham now do my kids 1.6

[Back To Modding]

Do I need to turn edit mode off first before I log in?

[Back To Modding]

It now loads but now I get an script error and will not load an further than this.

[Back To Modding]

Does xbmc4gamers still need to be in E: root?

[Back To Modding]

13 minutes ago, SS_Dave said:

You do have the X2-5035 bios?

 

Cheers

SS Dave

Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

I do but is there a way to tell it is actually loading? I have the ind-bios as well. In the OpenXenium chip do I just set as default to flash it? or do I have to load it?

[Back To Modding]

It did not make a difference unfortunately.

[Back To Modding]

It's there and after changing the config file here is where I sit...

[Back To Modding]

x2config.ini

[Back To Modding]

Should the X2config.ini be in the C root or should it be in the bios folder either way the current dashboard will not go away!

grrrrrrrrr............

[Back To Modding]

So, i used Slayers 2.7 and redid the drive and opened xbpartitioner and reformatted F and G 40 64kb 

Here is what everything looks like

Im trying to get the bios config setup to load xbmc4gamers to load on boot but not working yet, I will keep trying.

 

 

[Back To Modding]

1 hour ago, Ging3rguy said:

Here’s info on xbpartitioner with cluster sizes. If you have hexen use that and do a new hdd install.

https://www.reddit.com/r/originalxbox/wiki/xbpartitioner?utm_source=share&utm_medium=ios_app&utm_name=iossmf

Did xbmc show the profile directory?

No, it would not pull up any info

[Back To Modding]

22 minutes ago, SS_Dave said:

I would wipe the entire hard drive and start from scratch.

Start with a new install from Slayers disk then use XBPartition 1.3 to partition and format the F: and G: drives.

FTP XBMC4Gamers to E: drive then edit the default dash in the X2config.ini file .

Then in the profile manager press the Back button and check that file manager can see the F; and G: drives

Also in the file manager confirm there is a Q: Drive.

Now add a new profile.

Now login to your profile and download the updates.

 

 This is what the directory looks like on one of mine

 

Cheers

SS Dave

Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

Use Slayers or truHeXEn? If Slayer, is there a current one you suggest?  Sorry for all the hassel, I cannot for the life of me figure out where I'm going wrong.

Also when you format f and g do I just pick format 64kb for both and then write table?

Thanks again.

[Back To Modding]

That did not work, i might look to see if I can get XBMC-Emustation to work....

[Back To Modding]

Correct

[Back To Modding]

It said it needed to restart but not update

[Back To Modding]

I have added the games folder to F: and G: and added 1 game into each folder. Made a profile and turned editing mode off. Logged out and rebooted. Went to log in and all I get is the 4 dots over my profile trying to log in.

 

[Back To Modding]

When I had the new HeXEn disk install Xbmc4gamers Q: was never installed either. So I must obviously be doing something wrong. I will install it again and add the games folder to G:

[Back To Modding]

In xbpartitioner I had er on F and G so I selected format with 64kb, I did this s few times to make sure it cleared. Then I formated and wrote tables

[Back To Modding]

34 minutes ago, SS_Dave said:

Is this a typo 

dash1name = e:\xbmc4gamers\default.xbe

 

Cheers

SS Dave

Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

Yes it was

[Back To Modding]

So build the profile then log out and re-log in?

[Back To Modding]

I have it in root of E and set in the config file

dash1Name = e:xbmc4gamers\default.xbe

 

[Back To Modding]

I have I believe the newest pre-built xbmc4gamers installed and made a profile, I click my profile and tried to load it but all that happens is the 3 dots cycle through and never loads the profile.