[XBoX Blinks Three Times Green and Then Green and Red]

9 hours ago, SS_Dave said:

Yes that chip should work it  looks like aladdin chip so it should have a compatible BIOS preflashed and you are better off soldering a pin header to the mod chip.

I would link the BT to pin 2 of the LPC (ground) to make the chip always active. Like this

You will also need to do a LPC rebuild and this is how I wire it.

And you can see a spot I have marked D0 that gets connected to the D0 point on the modchip or you can cut the LFrame trace like in this pic instead of using the D0.

In this pic it shows LFRAME to modchip do not do this.

 

Cheers

SS Dave

Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

 

 

Thanks for info, i ordered this modchip. I hope when i install it, my xbox will be work.

[XBoX Blinks Three Times Green and Then Green and Red]

This chip compatible with xbox v 1.6?

[XBoX Blinks Three Times Green and Then Green and Red]

16 minutes ago, SS_Dave said:

What happens if you boot the Xbox with the DVD and hard drive disconnected it should still give the boot animation and a error code 7.

when i boot xbox on TV no signal (without hdd and dvdrom or with hdd and dvdrom, no difference).

[XBoX Blinks Three Times Green and Then Green and Red]

1 hour ago, Falcon639 said:

That could mean a dead xbox, did the seller test it before you received it?

Whats happening to your xbox is called Frag'ing (Flashing red and green).

Hope this helps.

Seller sell xbox as not working.

It's can be fix?

Also i disassembling xbox and see on motherboard this connector (first photo), this connector means this xbox was be chiped? (i think seller remove modchip and sell it to me xbox without modchip)? also on back side motherboard i see wire (second photo), for what this wire? for modchip? 

 

[XBoX Blinks Three Times Green and Then Green and Red]

Hi, I bought a broken XBOX version 1.6 (the seller says that softmod is installed on the XBOX), when I turn on the console it blinks three times green and then green and red (no signal on TV). I need to find out why it doesn't work. Can anyone help? Video: https://vimeo.com/423904512