Jump to content
  • Similar Content

    • By SpeedyBug
      Hello everyone, I have a little problem with a softmoded Xbox with an Ndure, XBMC4Gamers main dashboard, Unleash alternative dashboard and equipped with a 500 GB hard drive. The console has about 80 working games on F and G partitions. The problem is that some get corrupted when I try to put others on the hard drive. The home artwork disappears and sometimes I can no longer launch the game. I noticed that some files were getting corrupted. The copied games do not launch or I have an "unreadable disc" message ... I have tried various things but have not been able to resolve this issue. I forgot to say that I have about 30 GB left available on G ... I would like to point out that this problem is only present on the G partition, the one I mainly use in fact ... I even tried to copy games via DVD2XBOX but they are not copied correctly and will not launch, while the application does not report any copy error ... After having thought about it, I tell myself that what produces these "instabilities" or these bugs is the fact of having via the FTP recorded and then erased such or such game many times, which causes the hard drive to be completely fragmented. I understand that it is useless in principle to defragment the HDD but at some point it must be necessary ... No? Has anyone ever had this problem? What I plan to do is move all the functional content to an external HDD via FTP and then re-inject everything cleanly so that I can then have these remaining 30 GB on the G partition without any problem. Thank you for reading me, hoping that some will provide me with an explanation and possibly an alternative solution ...
    • By Difio
      Hi, I'm having a really strange issue with some OpenXenium I've built that is driving me crazy. Basically, after flashing XeniumOS with Xenium Tool and hotswap method, on the first boot the modchip works fine: XeniumOS is loaded, I can flash other bios (and I can boot them!), so everything works as intended. However, if I reboot the Xbox the chip doesn't work anymore and the console FRAG. If I reflash XeniumOS it works again at first boot, but - as before - when rebooting xbox everything I get is a FRAG.
      I tried turning on with eject button or recovery switch, but nothing change. I tried different dump of XeniumOS and used also the official release of 2.3.1 XeniumOS. It simply acts as a modchip without any bios. It's really something strange because this is happening with all of the five chips I've assembled, with exactly the same behaviour. Thinking of a bad batch of Xilinx or flash I bought another set, but even with them I've the same issue. I really can't understand what's going on. It's like the flash get corrupted after every first boot of XeniumOS.

      The Xbox boots without any issues with Aladdin Xblast (which I use to do the hotswap method), so I don't think it's something related to the console. I've upgraded RAM to 128MB, but I don't think it's a problem for openxenium. I program the CPLD with a DIY Xilinx Parallel programmer and Impact (using .jed or .svf) without any error and CPLD works fine, it's recognised by xenium tools, I can change the colour of the LED etc.
      Any suggestions? I've searched on the internet, but could not find anything useful. Thanks 
       
    • By geohunk
      I messed up. Was fiddling around with configmagic trying to lock the HDD on my chipped Xbox 1.6 so I can transfer and use the HDD on my softmodded Xbox. I followed this guide here: https://www.biline.ca/xbox_uxe_hd2.htm 
       I was able to update the EEPROM as stated and locked the HDD so it can be used on the softmodded Xbox. That worked fine. But now my chipped Xbox turns on but no picture or video whatsoever. I don't know what to do next...

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.