Search the Community

OK, new modder confused here. I've been spending my time fixing up dead and half dead boxes, and thought I'd see how setting up a new hard drive works with a hardmodded console. I used the OG Xbox Install disc to TSOP to Evox m8+ nodvd, wiped the stock HDD and installed UnleashX and the default apps, and it boots fine. However, now when I swap a different drive to set up (either a 10GB drive from another Xbox, or a WD 80GB drive) the box fails to boot from DVD. I've tried with two different DVD drives, but it's always the same... even the seeking sound the optical drives make are the same (they keep going forever in an identical repeating "pattern" until I switch the console off - no, not impatient, waited for 5-10 minutes). When I switch back to the original HDD, the system boots up fine from it, and also boots from the DVD drive - and the DVD drive sounds "healthy" again compared to previous attempts. I tried powering the bigger new HDD with an external power supply, since I noticed it was pulling more power on the 12V rail (thinking maybe the old PSU is just at its end), but this makes no difference. I've also tried jumpering the drive to cable select and master+slave, but still nothing. The original drive is a Seagate, both replacements were WD. Is there something I've overlooked?

hey guy im in need of a little help the issue is whenever i TSOP an xbox that when i go to install games and apps, some work some dont, the ones that dont work load for a very long time and boot back to the dashboard but when i put the same apps/games on a softmodded console it works just fine EXTRA DETAILS: 1.the consoles im TSOPing are the 1.0 model 2.i used hexen to tsop 3.maybe the hexen tsop mod is missing files to boot some of the apps/games thanks in advance