Search the Community
Showing results for tags 'xboxhdm23usb'.
-
I want to copy large amounts of data from one Xbox OG HDD directly to another by connecting them both on a PC with two P-ATA channels. With the older XboxHDM 1.9 and 2.2a (which are essentially Linux distro's supporting FATx booted from CD) I can mount the F-partition of both drives using "mount -t fatx /dev/hda55 /media/source" & "mount -t fatx /dev/hdc55 /media/dest". But the problem is that these versions show corrupted file names. But with XboxHDM23USB all the file names are correct. I can even use both of my drives if I launch it manually. But because it's running in QEMU the copying is very slow Now the FATx driver is in the kernel and 1.9 and 2.2a uses the same kernel. Only 2.3USB has a newer kernel, maybe that's where the problem is. So I wanted to boot this 2.3USB version on real hardware. I took the "kernel" and "initrd.gz" and tried booting it using ISOLINUX and PXELINUX, but it just stuck at "Uncompressing Linux... Ok, booting the kernel.". How can I make the kernel and initrd.gz from XBoxHDM23USB booting on real hardware? With 1.9 and 2.2a on real hardware all filenames are corrupted: With 2.3USB it works, but is very slow because it runs in QEMU: But I can't get the 2.3USB version to boot on real hardware using ISOLINUX of PXELINUX:
-
I’m attempting to fix a friends unmodded 1.0 Xbox with a dead HDD (error 7). I’ve successfully extracted the EEPROM using PiPROM and prepared a new IDE HDD with FATXplorer. However I’m having trouble locking the replacement Seagate ST3320620A IDE HDD which according the Xbox Hard Drive Compatibility Chart supports locking. Initially I used an IDE to USB adapter but XboxHDM23USB Beta 3 and 4 complained about an unknown USB chipset. I then tried a StarTech PATA2SATA3 IDE to SATA adapter which progressed a little further but still fails with “ATA SECURITY SETPASS failed: scsi error aborted command”. The output from XboxHDM23USB Beta 4 shows that the HDD is in the frozen state which I believe prevents unlocking/locking. If this is causing the failure, how can I unfreeze the HDD? Can I use some other utility such as hdparm to lock the HDD?
-
I've tried several different usb to sata devices even plugged in the HDD to my main sata's PSU port using sata to usb and have tried to unlock the HDD however it just spews out error 121 ATA is disabled, I'm hoping someone out there knows a fix around. I've tried chimp also with failure to unlock and ide 80gb HDD. Would it be best to leave HDDs unallocated while using xboxhdm23usb? Also does it normally take some time building the drive? When I try to just go ahead and run xboxhdm it just lags out at creating sectors. Sorry if this is the wrong board new here would appreciate any advices. I'm using beta 4.
-
- xboxhdm23usb
- error
-
(and 1 more)
Tagged with:
-
Hello,i know that i am boring with these questions but i dont know anything about og xbox softmodding.Anyways,i am trying to softmod xbox with ide to sata adapter.I tried different methods but it was just failure.Then i realized that my drive was locked.I tried 3 methods for hot swaping so far and none of those methods work.I have msi a320m-pro with amd athlon 240 ge.My xbox is 1.6 revision with 10gb segate drive ST310014ACE.I also tried using xboxhdm,burned the cd,puted it in the dvd drive,but when i went to type xbrowse it said cd couldnt be found.Xbox hdd shows in windows disk management as non initialized.
-
Hello guys,i have a question. How can i softmod my xbox using a modern pc and ide to sata adapter?I tried with xplorer360 but every time it says could not find fatx drive.I hot swapped drive using two methods.I heard that you can softmod it with ide to sata adapter using xboxhdm23usb.Is that true,and if yes,how to do it?
- 4 replies
-
- xboxhdm23usb
- with
-
(and 3 more)
Tagged with:
Board Life Status
Board startup date: April 23, 2017 12:45:48