Search the Community
Showing results for tags 'can`t'.
-
I've a Xbox v1.2 - 1.5. I know you can TSOP it, but I like the options a modchip brings. So, I soldered the LPC pinheader, a wire from D0 to ground (screwhole) and a wire on the Aladdin XT PLUS2 XT 4032 chip from the BT to the other pad. Now when turning on the Xbox it FRAGs. The led on the modchip is on. When I remove the modchip (I didn`t remove the LPC header or the D0 to ground wire, only the modchip from the header) the FRAGing exists. Before I soldered the modchip, the Xbox was working fine. Some photo's from my soldering job. I also tested from the top of the board the D0 point and my meter beeps on all the screwplates, so that looks fine. Also the LPC pinheader looks good. So I'm a bit frustrated because of this issue. https://imgur.com/a/3IRniGb Above the pinheader you'll see some flux residu, I've taken care of that after the photo's. Is there a way to double check the connections from the pins and the back of the board to somewhere on the board?
Board Life Status
Board startup date: April 23, 2017 12:45:48