Search the Community

Long time reader first time poster! Sorry to start in this way but I'm completely lost and if possible I need your help all... First disclaimer, before the attempt on both console to install the modchip everything works fine (stock console no softmod or other modchip). As per the title I've installed the same Aladin XT Plus 2 (pick-up from AliX) but at the end (after the first boot) both console start to have the same issue as per below : Tries to Boot 3x then FRAG (Christmas Lights) Usually due to a failed or improperly installed modchip or the IDE cable being plugged in upside down somewhere. Check modchip wiring and IDE cables. If you did not do any soldering, it could be a bad PSU. - On both console I've already removed all the wires for the Aladin (beside the connector on the MB) - Cleaned everything with isopropyl alcohol - Replaced the power supply - Recaps (Done only on the 1.0) - Searched on the motherboard for broken component or any other strange visual sign of issue Is clear that the Aladin I've is faulty but what I can try now to revive those two console? Thanks!