archfranck

ok as soon as i get home check

I soldered on but I do not see the Evox logo .. I tried to keep on 2-3 seconds both the on off button and the eject button .. it always starts in original mode .. it can be the mod chip failure .. bad that it goes me 2 alternatives remain or soft mod or tsop ...

ok today try...

now send photo better

i use filezilla o flash xp

Dave other information I tried to charge usb both tsop and softmod .. My usb mod soft key works and starts the exploit for which you could make the softmod, the Tsop key does block the xbox with green screen error .. I am almost sure that some file is missing in the tsop key

TANCKSSSSSSS Hi Dave, then I got the first xbox, a bit of a rip off the dvd does not work absolutely does not start so I tried but use another dvd to understand if it was modified I put on a non original dvd and did not read it for which I thought were original .. the evox logo is not seen at startup and starts with the original ms dasboard. I opened it but I saw that it has an aladdin chip I think soldered without a base. Either it does not work or some solder or wire will be disconnected even if it looks well welded. Surely it is a 1.0-1.5 version I have seen the time capacitor in the usual place ... do I remove it? What should I do I remove the chipmod and try tsop or can something be done to keep the aladin chip and make it work?

TANCKSSSSSSS Hi Dave, then I got the first xbox, a bit of a rip off the dvd does not work absolutely does not start so I tried but use another dvd to understand if it was modified I put on a non original dvd and did not read it for which I thought were original .. the evox logo is not seen at startup and starts with the original ms dasboard. I opened it but I saw that it has an aladdin chip I think soldered without a base. Either it does not work or some solder or wire will be disconnected even if it looks well welded. Surely it is a 1.0-1.5 version I have seen the time capacitor in the usual place ... do I remove it? What should I do I remove the chipmod and try tsop or can something be done to keep the aladin chip and make it work?

I have a container with at least 100 DVDs burned ... now I do not find the soft probably xp I use verbatim -r ok try last dvd and xp and stop, I got a new xbox tonight I will remove it and clean it I change the DVD belt I see the version and try again tsop first but I practice on an old card and use your technique

Dave wanted to make a dvd of a frontend to a friend, hipervision that I have on the 4.2 gb harddisk and I don't remember the procedure anymore .. I remember that several years ago I used ISO craxtion 1.31 that worked I did patch xbe and then burned it not I remember with which soft ... while 4.0 was not working .. now I was unable to start 1.31 it does not have the only executable setup ... but it does not start I have win 10 .... I used quix to extract ISO and patch eimgburn to burn .. but don't read the dvd as soon as I insert it .. how should I proceed which soft to use ?? craxtion 1.31 I was fine but it doesn't start I downloaded it from xbin

I hadn't thought of that .. you're right some evening I try on some old electronic card .. yes Thanks anyway dave ..

new update .. I tried the procedure with hexxen I chose not winbod and at the time of flashing bios 1.0-1.5 from 256 kb he said it was unwritable ... so I think I did not do the soldering well ... and I have not plus the courage to use the tin sucker to try again to redo the welding I leave it so in soft mod and try again with the new xboxes that are coming to me ..

I'm afraid to do it again .. patience I close everything and I leave it the day after tomorrow at the next new Xbox .. try again ... I am really a fool with microwelding, yet I have many things, deoxidizing paste, soldering station now I have to get the magnifying glass with light .. but I'm wrong .. ummmm I'll try to the next xbox

new update .. I tried the procedure with hexxen I chose not winbod and at the time of flashing bios 1.0-1.5 from 256 kb he said it was unwritable ... so I think I did not do the soldering well ... and I have not plus the courage to use the tin sucker to try again to redo the welding I leave it so in soft mod and try again with the new xboxes that are coming to me ..

new update .. I tried the procedure with hexxen I chose not winbod and at the time of flashing bios 1.0-1.5 from 256 kb he said it was unwritable ... so I think I did not do the soldering well ... and I have not plus the courage to use the tin sucker to try again to redo the welding I leave it so in soft mod and try again with the new xboxes that are coming to me ..

Yes Dave I realized that doing those welds I can write a new bios. My problem is that I can't proceed with splinter cell. Then I saw that video that I sent you where slinter cell is not used and I wanted to know if I could do it at the point where I am, just load hexxen and flash the right bios. but bios checker gives me a strange unknown bios ... is this normal?

this is my bios is normal .. after welding or did i do something wrong ..? i see video.. yess ummm okkk nest time try this method... now I have welded and I don't want to touch it anymore,

this is my bios is normal .. after welding or did i do something wrong ..?

ok clear .. so I'm stuck right now because with the tsop key and with the saved games..splintercell (linux) it doesn't make me the correct exploit, so either mabca some files in the usb, or I soldered badly .. but that problem of rebooting after the exploit was giving it to me even before so I think the problem is in the files of the stick

updates, then I had a copy of msbackup on the harddisk itself and I did ms dash I copied from the usb memory to the xbox memory I launched spintercell (linux) but the dashboard restarts (xbmc). I also tried to change dahboard using uleash as a dash, but the same as soon as I launch the save splintercell does like a small crash and restarts the dashboard .. or there are the files inside usb not perfect ... I could also hurt the welds ... but I still ask you if I install xblast and send the bios from the c \ bios folder? It can not be done?

Azz not have ms dashboard for install or copy in e:\dash now download.. in internet no work error i dont know instal ms dashboard.. problem is copy save pendrive in memory xbox ad after run splintercell

I could not resist and I immediately soldered. I am very scarce to make microwelding .. a big droplet came and I was afraid that the Xbox would not even turn on .. I turned on and on ... brrrrr I made 2 very large welds then you have to explain to me the materials you use and the secrets to weld accurately .. I don't have the microsoft dash to install the tsop..but I repeat I already had the soft mod and I have the xbmc dash .. if I install xblast and put your bios in \ bios and do the flash? does not work I have to force Microsoft dash, pendrive tsop copy the bailouts and then launch splinter cell and connect to the LAN?

ok i try my first tsop heheh afternoon or tonight

Dave I am getting 2 xboxes .. I don't know how to change or not. I was thinking here on the table I have an xbox my 1.4 with soft mod to which I removed the condenser of the clock. I wanted to do the tsop by welding the 2 points R7D10 and R7D1 so I can use any non-locked hard disk. at that point after welding I just have to flash the bios? or should i first remove the soft mod and exploit it with the tsop usb stick? Then can I later unlock the same hardisk of the soft mod using hexxen or other tools? so you can use it elsewhere?

ok i have solved it .. now my problem is to copy .. i am with several disks for chipmod or tsop of 120 250 320 gb and 2 raw images of 2 tb and 500 gb. But if I get a 200gb disk how can I make cef copy without installing new disk every time and then copy games via ftp .. there is a method to copy files or partitions from disk to disk in order to have a disk for tsop or very fast chipmod ..?