archfranck

ok wait I get the conductive paste .. as soon as I have time I disassemble the moterboard so idebntifichiamo the motherboard without errors .. to understand the bios to be sent .. then there is the problem of the usb stick to load over the exploit for the tsop that does not work for me .. I only work the key for the softmod. But if I have not misunderstood I can use the key for the softmod to do the xploit, but then I do not make the soft mod, but I go to the flash section and send the correct bios .. however as soon as I have everything we try .. ciaooo Dave. maybe I buy myself last medello bmw gs 1250 .... last moto for my eheheh

Hi Dave .. I had a little to do .. let's forget this xbox .. the voltages do not correspond with what you give me, maybe I'm wrong something, however the power supply unit works, as I tried it on another xbox and it works. I'm buying the capacitors then as soon as they arrive I change them to try. However, let's leave it alone, meanwhile I got an original xbox 1.0-1.5 I have not yet understood which version. I am waiting for the conductive paste to arrive so then I will contact you for support to carry out the tsop. Hello and many beautiful things.

no flashing...0 volts i connect ground blakck wires and red wires no voltage... only orange is positive 3,2 v..... boooo but alimentation for my function but it works safe I got it from a working one and what was there before I mounted it in the other and it works as well Problem is moterboard think

all very strange I have not detected any of the voltages you have indicated to me .. but the strangest thing is that I have exchanged the same power supplies from a working xbox and continues to work with the other power supply .. so I would say that the power supply it works. But I do not detect the 5 volts neither 3.3 nor 3.2 in both the first and the second power supply. I don't even detect current in the plug that goes to the hardisk in both power supplies. however both work with the working xbox. with that faulty both do not turn on the Xbox. and I do not even detect current to the transistors .. very strange .. I tried the tester with a 1.5 volts battery and it works .. Strange but I would say that the power supply works 100% now I have mounted the power supply that made the other xbox work ... Power supply function 100%

ok toonight tryy tanks daveee

99% the power supply is ok I also hear the click when I insert the socket ... the motherboard is perfect no trace of corrosion, even the capacitors I have read that need to be changed seem to be in place, they are not swollen, but if I have to change them I can do it is easy .. let me know what I can try, otherwise I keep it as a spare part .. I think it is a 1.6 version, in fact it does not have the condenser of the clock in that position that is normally found in the v. 1.0-1.5

hello Dave, I'm waiting for 2 more xboxes to arrive ... but I have 2 dead ones ... who knows if you give me any indication, can I get them started? This is one .. it does not turn on completely off if I press the buttons, some time ago I tried to change the power supply with another working one but nothing the same does not start. You can test it if current arrives at the power plug. I can use the tester not in a professional way .. but I can measure the voltages and continuity of the signal on a circuit, if you can do some tests let me know ... thanks the power supply should be working as I tried it on another xbox .. I read that the capacitors could be replaced on the motherboard

ahhh okk very good

today send you photo my old car my papa...alfa romeo alfetta gt 1800 years 1974

eheheh gooood and you bmw eheheh good car sportive .. model???

Ok Dave perfect.. ind bios 5004 f and G.. ok now see partition F/G... Xbox 33 - 320 gb go Garage Next is 3 hard disk 2 tb.... at 40 xbox stop for my... my garage fullllll 4 moto and 4 auto... STOOOOOOOPPPPP You like moto? i have bmw gs 1200 - CBR 900 Fireblade - Tmax 500 yamaha and scooter 250 aprilia atlantic STOPPPPP

i send photo post number 247-248....

Nothing dave does not send it to me .. I tried both with slayer and also with osblast and I put the file you sent me long ago x2.5035 and the x2 config file to put in C or E ... it doesn't work ... In another xbox it had worked .. that bios .. in short, it doesn't work .. check the bios checkers and the kernel .. it looks like an aladin

I bought it from a Chinese site it will arrive in 1 month, from now on if I have to do tsop use this metoto .. I think very easy ... if I put too much I clean immediately with isopropyl alcohol .. for bios ok tank try now tanks dave Without you I would not have fixed the last 4-5 xboxes .. people sell them when they no longer work .. maybe they only have the wire unplugged ... I don't know if I find that bios on DVD ... I try ... in case you can send it to me ... if I find it I will write to you

Hi Dave .. 1- I didn't risk making the flash .. I am waiting for your advice .. because as I said before it doesn't see the correct partitions of a 320 GB ide hardisk that on other xboxes works correctly G and G ... anyway between 1- 2 days I get 3 hard disks from 2TB and in case we update later .. I also send you photos of the kernel in case you need to choose the correct bios. 2- other topic ... ehehe tonight I was thinking how difficult it is for me at least to weld the points for the tsop .. but I got an idea..why not to use the silver-based electric conductive paste that is used with a small syringe or with a marker and solidify after 10 min, just a small drop with the sirigna and contact is established. What do you think about it? it is feasible? it seems very simple ... I send you a pictureNuova immagine bitmap.bmp Nuova_immagine_bitmap.bmp

Dave sorry but I have to update the bios of the latest xbox modchip excuter2. Keeping the ide cable I installed a new 320 gb ide harddisk which on another xbox with mod chip works F and G with games. But as soon as I mount it on the latter it reads only a part of F and G does not see it. I have sometimes used hexxen 2019 to successfully flash has all types of updated bios. But I'm not sure of the choice, I would not want to do damage and I wanted advice from you before proceeding .. I send you photos to make you understand the choices I have to make. 1- bios 265 kb-v. 1.0-1.5 2 - bios x2.4981 F and G or ind.bios 5004 F and G or xecuter 2.3-2.6 xbox v. 1.0-1.5 or xecuter 3.0 xbox 1.0-1.6 or

okkk proff.. next xbox is ORIGINAL....eheheh i not have 1 xbox original..eheh in my mind i try tsop eheheh ok good work... now sleeeeeeeeep

everything is fine I close .. in your opinion I have to flash an updated bios or that's it .. for now I put on a 320 gb ide hard disk but if one day I put a 2 tb hard disk on this quest is this bios ok? Update i connect Hardisk 320 gb not see partition G... and i think need update.. (last ind bios work on 2 tb)

Great professor DAVEEEE yesssss DAVE i use red line and in start i see executer 2... Need flash bios update?

Ok Dave unfortunately we can't understand with the language. I soldered a yellow wire behind on the alternative pundo D0 and brought it on the board. See the photo ... now I have to solder this wire with the red wire that had come off, or to ground as I did for the BT point? LINE RED OR LINE BLACK

Dave I am a little confused I connected the bt point to ground .. and then as soon as I tested the d0 point I realized the disconnected wire .. which I think is connected as in the photo. What am I doing now? Yes, you are right, it was connected to a D0 point ... now you tell me to reconnect it not there but on the back where the D0 point is thicker and therefore easier to weld?

I soldered on but I do not see the Evox logo .. I tried to keep on 2-3 seconds both the on off button and the eject button .. it always starts in original mode .. it can be the mod chip failure .. bad that it goes me 2 alternatives remain or soft mod or tsop ...

Dave I checked the D0 point which however is not connected with any point .. I tried with the tester and it does not seem connected with any point .. then I realized that the wire you marked in white-yellow has come off but I don't remember more from where .. from the photos..I can't understand anymore ... it seems it was connected on the motherboard in the middle of those wires

I soldered on but I do not see the Evox logo .. I tried to keep on 2-3 seconds both the on off button and the eject button .. it always starts in original mode .. it can be the mod chip failure .. bad that it goes me 2 alternatives remain or soft mod or tsop ...