archfranck

ahhhhhhh okk i have try but error 16 ok now resolve

ok as soon as I can ... I start the xbox with white chipmod and with that wire that starts from D0 and goes to ground. 1-Start slayers I choose flash bios 256kb V1.6. 2- then I detach the white chipmod and put the black chipmod and run the flash bios command. 3- close everything and go back the 3 wires on the black modchip in the locked Xbox and try if it works

I understand and after I run the flash restore that connection cut? ok afternoon as soon as I have time I proceed

1-then I unsoldered and cataloged the 3 wires from the black chip. 2-now I have to ground the D0 point of the white chip before turning on the Xbox, but the D0 point already has a soldered wire going from the motherboard, what should I do?

ok now it's even clearer .. regardless if i can or i will destroy the xbox it doesn't matter .. i appreciate the support and the time you dedicate me above all Dave ... thanks

but anyway if I have not misunderstood the bios is installed in the chipmod .. I have another 6-7 chip mod between aladdin and others .. bad that it goes I already have the 3 wires soldered on the motherboard it is about soldering them to the new aladdin chip. it should also be easy

ok Dave I await your answer and tomorrow I calmly proceed to unsolder the black chip ... I miss this experience of the chipmod hotswap ... hopefully good

then dave 1 operation unsolder the 3 wires from the black chip of the 1.6 and label them ok easy, Then I launch Xbox 1.4 with the DVD slayer and leave it on the main menu. Then I detach the white chip and attach the black chip. But I didn't understand which ground point should be soldered with the black chip just mounted on the D0 point of the black chip?

but if I replace the modchip with a new one? the bios is stored in the mother scherdqa or in the modchip?

first photo is1.6 and photo number 2 is v 1.4 but I still haven't understood well do I have to unsolder the wires to remove the chipmod from the 1.6?

but how do I exchange the chip if there are soldered wires? Yes i have xbox 1.4 whir chipmod... send you photo..

azz ok but possible resolve..ok ok but I don't understand hot swap well. launch the soft for the bios flash setting v1.6 256k, but at the moment of giving ok what should I change, hot swap of what? the hard drive? I do not believe

hello Dave this time I did damage, I got a new xbox v.1.6 with modchip I installed 250 gb hard disk but as usual I only sold 120 gb in partition F. I wanted to flash an encore for v1.6, but it was not specified the size I flashed and in the middle it stopped I think I flashed 512kb instead of 256 and now it doesn't start anymore ... what an idiot I'm too hurry I didn't ask you .. and now he won't leave ... do I have any hope of resurrecting him?

yes ok but if have the time repair.. tanks.. excuse for my english

now I have loaded all 124 gb .. it does not matter much to lose 20 gb ..

it works, but I have a 160 gb hardisk and I only see 120 on the F and G disk not available, but let's not waste time, it's only 30 gb, on G .. it does nothing

need file .ini? this bios...?

Dave bios for this chip? is aladdin i think... XBOX v. 1.4 and i think 256 k bios ... Bios to flash?

no dave i don't take it i found 2 xboxes working at 40 euro i take those..for the memory card unfortunately they have already sold it .. too bad because it is not easily found and it is expensive .. I think I will have to do the tsop with the softmod .. as soon as I get the conductive paste ..

and I don't know I have to buy it first .. ehehe

Hi Dave I wanted to buy this xbox only the machine without joy, but the seller says it doesn't work. It lights up but nothing is seen on the screen, black screen. seen in the hole that has the aladdin chip mod. What do I take it and then try to get it started? It costs me only 18 euros including shipping. I'll take it?

ok dave all clear I buy that memory ... but in reality I could also use the soft mod .. for me it's not a problem I know the procedure. Dave, but I read some videos on the internet .. now the topic is a little clearer. 1-I can use my soft mod key that works with exploit splinter cell to make a soft mod first. 2- then balance the 2 contacts on the motherboard depending on the version of the Xbox (1.0-1.5) 3-put on the dvd hexxen and flash tsop. FINISHED. If I can not copy the files to another key to perform the tsop without going through the sofmod it is not a problem .. I use the softmop key and I solve, I lose 5 min more. is this correct? 4-when I perform the soft mod it is not necessary to do the msbackup, as I then change the hardisk and I remain the original in case of problems. I'm just backing up the eprom. Correct? So now in this original xbox I do the soft mod and backup eprom and wait for the conductive paste so I make after the tsop. STOP or I wait for my memory to arrive so you can support me in this new procedure for me as I learn it.

I think I need the memory to put the files inside and then perform the tsop. I have already tried with an xbox compatible usb but it does not make me copy files beyond a certain size gives me an error. Even if with the same usb I have the files for softmod and it works, but as soon as I put the files for tsop it doesn't make me copy the big ones .. I'm not understanding anything anymore ..

this is Ok?

in italy price for 1250 gs is 21.000 euro no not have memory card... possible buy?