archfranck
-
Posts
310 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Store
Everything posted by archfranck
-
E:
-
yes i have choice in softmod boot dash xbmc but after flash bios i have uleash.. ok but no problem.... now i have TSOP? All ok?
-
then I proceeded and loaded some files and then the mask with various options opened and in the end I chose hdd bios, pointed to the file \ bios.bin which I believe had saved before .. it flashed regularly and now starts with ind-bios but with unleash, while before I had put xbmc. At this point what do I have a soft mod or a tsop ???? and clearly can i change boot dash? i prefer xbmc
-
I don't select advanced but do I proceed regularly without further options?
-
last step GO?
-
ok go
-
correct this.. and now chois ind bios 5003 or 5004? hopefully he writes otherwise I have wrong welding Ahhhh slayer 3.7 speack xbox 1.1 hexxen 2019 speack xbox 1.4 this is correct..
-
i don't want to go wrong .. i did softmod ok .. i launched the dvd slayer flash section bios tsop and i chose bios 1.0-1.5. Then it doesn't make me choose anything else, 256KB or winbod, it takes me directly to the various bios m8-x2-indbios. there is ind-bios 5003 -67. AHHHH ok now use hexxen 2019
-
use hexxen or slayer 3.7 ?
-
ok this morning I reassembled everything and in the meantime it turns on normal with the original Microsoft dashboard. This already means that I have not done damage. Now since I have problems putting the direct tsop files and the memory card on the USB stick, unfortunately they didn't sell it to me. I believe that in the meantime I have to install the softmod as I always have and then put on the DVD of slayers or hexxen and flash. If all this is correct I proceed and then you indicate which files to choose from slayers or hexxen. After this experience I want to try to make a chipmod on a 1.6 version .. eheheh
-
now the problem is to see in the meantime if I did the welding well and how to load the bios and the only way I have is to do it via soft mod .. now I go to bed tomorrow morning I put everything back on and turn it on
-
ok done maybe I used a little too much, I hope the sides of the motherboard is isolated
-
yes i not have 1.1 but softmod tool sign 1.1.. azz ok 2 point in same side front ok
-
this is my situation in my moterboard front and rear. but r7d3 is not in my motherboard 1.1 I have this equal to the photo where you deleted R7D10. I proceed?
-
but r7d3 is not in my motherboard 1.1 I have this equal to the photo where you deleted R7D10. I proceed?
-
ok Dave the conductive paste came to me, but I think I would be able to solder the contacts for the tsop using your tin wire method attached. Anyway I want to try the conductive pasta, on some xboxes that have arrived and that I have put aside on hold .. I have an original xbox 1.1 I put on the DVD splinter cell with the soft mod to see the version .. Version 1.1 as you taught me to be able to flash the chip I have to combine 2 points R7D3 and R7R4. Do I start with this operation with conductive paste? I bought 4 packs in small syringes. I could even try a chipmod, I have several aladin .. but the tsop seems easier
-
ok prof......
-
I soldered the 3 capacitors and it works ... the display is no longer flashing ... perfect .. How did I make the welds?
-
I bought capacitors 1- 10 v 3.300 nf 2- 6.3 v 3.300 nf 3- 6.3 v 1500nf could they be used with other features?
-
now I am an expert electrician of microcircuits ... ehehehe ... ok after operate .. i have buy this condensator and replace ..
-
99% buy new bmw GS 1250 version exclusive... my wife GRRRRRRRRR eheheheheh now complete the work in the xbox 1.4 white chip, I have another problem is my first or xbox and for 4-5 months I have noticed a flicker of the video, and today while I was changing chipmod I noticed some slightly swollen capacitors ... it could be and that the problem, it is 3 capacitors 6.3 v -3.300 nf.
-
ok I have resoldered the 3 wires on the black chip and on the non-working Xbox and now okkkkkkkk ... now I go out on the bike with my wife and tonight I will fix the other Xbox ... Dave got the conductive paste today .. in these days I try some tsop .. but you must always give me support .. alone I do damage like an elephant in a crystal shop ... hihuhuhuh Thanks again as always ... I'm at 36 xbox ... at 40 I stop ..
-
now restore everything as it was in the 2 xbox?
-
yesssssss Dave... functionnnnnnnn gooooddd you hare monsterrrr ahahaha
-
ok .. I flashed with dvd xwizard ... I did not find the dvd slayer ... I flashed 256 kb for 1.6 m8 plus + 137gb ... all correct and then the normal xbox went off
Board Life Status
Board startup date: April 23, 2017 12:45:48