[Mod Chip Bank Switch Wiring Schematics]

11 hours ago, John7272 said:

The DO point on the xbox should have a wire connected from the modchip, usually a grey wire. if you instead jump the wire from the xbox DO point to ground, it tells the xbox to boot right to the modchip. if you ground the DO and disconnect the switch, it will boot the chip unprotected on bank 2 and you can flash it.

So uh. This is what I was basically asking if I could get around not having switches. So If I just unsolder the d0 and ground it it should boot bank 2? And assuming I didn't flash that with A bios I could possibly flash the chip. I got everything I need for that except the flat cable that connects the printer port thing.

 

But A long time ago this chip was used in A v1.0 xbox..Basically A mirror of what I put it in this time around so if I can get the chip to work without the switches I could possibly use this chip again i'm hoping.

[Mod Chip Bank Switch Wiring Schematics]

I have a 2.3b pro without the switches. Almost looks like the lite one but does that apply to the pro version? I literally have it hooked up inside an xbox and it doesn't work. 2 blue lights but it doesn't do anything. Can I use the lite diagram?

[XEcuter 2 3b Lite ( Not Plus ) Install Issues Frag / Boot Loop]

I have A 2.3b pro with no dipswitches..Can I still install this and have it work? I don't care about switching bios I just need one. But again. No dipswitches anymore