Slickaroo2
-
Posts
11 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Calendar
Store
Posts posted by Slickaroo2
-
-
19 hours ago, KaosEngineer said:
Clean that PCB. Edit1: Oh wait, it used to have a double-sided foam pad on it to hold it in place inside the console. Didn't it?
I don't think the solder bridge between the 3rd and 4th pins on the bottom
right-left-hand side of that PCB is to be there.Edit2: Reworded content. My other right - the left-hand side of the first picture.
Okay. Ill try to desolder the bridge and see what happens
-
-
I have a xecuter3 xbox with the faceplate, and it won't register player 4. If I plug in a controller in port 4, it'll light up but no controls. I went ahead and plugged the controller ports directly to the motherboard and it fixed my problem. It has to do with the usb ports mod built in the xecuter3 faceplate. What could the issue be? Ill provide pics
-
On 1/28/2024 at 5:28 AM, ShinGoutetsu said:
Hi, the link is working for me...
Alright downloaded. Wasn't working for me for some reason. Thanks!
-
On 8/26/2023 at 5:39 AM, ShinGoutetsu said:
I made this one if you want to try it? It just needs converting to stl
Hi could you please reupload the file? The link is down. I would like to try to 3d print yours. I tried others out there and give me wrong size or issues. Thanks!
-
3 hours ago, SS_Dave said:
Check in the M$ dash to make sure it's not set to mono as normally mono uses the left output
Cheers
SS Dave
Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.
I messed with the speaker settings in msdash and no luck. Its only left audio output that works across all my cables.
-
4 hours ago, Bowlsnapper said:
Try cleaning your AV port on the motherboard with alcohol and a q-tip. Then While the port is still wet, slide the AV cable in and out a few times. Then let them dry and insert. Let us know
Alrighty I cleaned my av port with isopropyl 91 and q tip, and took an av cable and gave it the good ol "in and out" action. Unfortunately still right speaker just doesn't wanna work for some reason
-
Alrighty I cleaned my av port with isopropyl 91 and q tip, and took an av cable and gave it the good ol "in and out" action. Unfortunately still right speaker just doesn't wanna work for some reason
-
So I have a OEM component cable and a 3rd party. They both work but give me one same issue. The right audio channel wont work, so its just my left speaker. Its not my TV bc my PS2 and Wii component works flawlessly. I cleaned the av port with q tip and isopropyl 91. If I use my Chimeric HDMI adapter both speakers work but I think its still playing through the left audio channel only. Im tryna use component so I can avoid buying another hdmi splitter. My xbox is a 1.2 128mb ram openxenium running IND bios recapped not by me.
-
Here's my situation . I tried soldering 30awg cable to modchip from d0. I accidently ripped and tried rebuilding d0 but no luck. It reboots 3 times and frags. Ive had soldering experience but this was a miss on my end.
Board Life Status
Board startup date: April 23, 2017 12:45:48
[SOLVED] Xecuter3 x3cp wont register player 4
in Hardware Mods
Posted
I desoldered the bridge between the pins you were talking about. It worked! Fixed all my problems. Thank you so much!