my2k2zx2
-
Posts
7 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Store
Posts posted by my2k2zx2
-
-
Is there anywhere to get a new tsop? I'd try swapping it out and see if that does anything. I'm guessing that with a modchip the system wont care if on board tsop is missing?
-
With the chip any dvd drive will work? I might have to go thrifting again for an ide drive if that would work.
-
That's my solder job, all pads were clean when I received the chip.
I have the pin header and the bridge is on the other side of the board. I have the wire ran to the bottom of the board as well.
I needed this hooked to the mainboard for it to boot to the dashboard. Without the chip it does the 3 boot frag.
From here I'm not sure what to do without a working disc drive to try and update the modchip.
I take it at this point the board's tsop is a goner without a full reflash/replace, which is out of my abilities and equipment.
-
-
Nope, the 3 wire trick didnt change things, still did the 3 boot frag.
Now to figure out how to update this mod chip as the console has a dead dvd drive. I'm all new to this, never owned an xbox before.
-
I bought a 1.0 that boots 3 times then frags. I installed an Aladdin chip and it boots to the dashboard.
Would this be something to try?
I'd rather flash the tsop instead of using the modchip if possible.
Board Life Status
Board startup date: April 23, 2017 12:45:48
Version 1.0/1.1 Flash Recovery
in TSOP Flashing
Posted
No biggie. It's booting with the modchip so that's good for now. I've got a new 2tb hard drive and adapter on order.
What is the best bios to try and flash the aladdin chip with?