dtomcat

I keep getting questions about the availability of the ogx360(i). Unfortunately I do not have anymore and have no plans to make any more for the foreseeable future. If I do make more … I’ll post here and let everyone know. Thank you for your interest.

I keep getting questions about the availability of the ogx360(i). Unfortunately I do not have anymore and have no plans to make any more for the foreseeable future. If I do make more … I’ll post here and let everyone know. Thank you for your interest.

I keep getting questions about the availability of the ogx360(i). Unfortunately I do not have anymore and have no plans to make any more for the foreseeable future. If I do make more … I’ll post here and let everyone know. Thank you for your interest.

I doubt it lol. I’ll try this weekend

Example of backing up eeprom on unmodified console.

Burned the midnight oil… boards are completed and fully tested (on 1.6 board). My initial board was also tested on a 1.0. Should be good for any revision… but again only tested on 1.6 and 1.0.

My boards are done and tested! All seems good! They still need pin header and test in Xbox (to test i2c). I don’t foresee any issues though. If all passes, I’ll try to get the board uploaded by this weekend. Also created a test firmware to ensure all components are working (aside from i2c). if you messaged me about wanting one… I’ll message you after final testing. Expect a message around Thursday/Friday.

If other methods can’t reflash the eeprom… this probably wouldn’t either though

Yes. I’ll be releasing it as open source.

Yes. Sorry. I’ll message you when they are made. Sorry. Thought I replied

Just tested on 1.0 board (couldn't wait lol)... it works! EDIT: didn't test how I thought I would. I wanted to use pogo pins, but they wouldn't fit into the pin header socket. So I just used some pins I had laying around and just pressed them onto the filled in LPC port. took a few tries, but it worked! I did not test writing, because keep the connection long enough might be an issue. If i made a jig with pogo pins, I know it would! So... it's REALLY easy if you have a pin header in the LPC port... if not, then you really need someway to get pogo pins connected. To write the eeprom, you'd only have to hold it in place like 10 seconds. it's really fast.

the board is all tested and passed! Works great. I did do some code change to make a bit better. I'll be making the boards promised next week (hopefully). I do have family coming to town, so may be pushed until after Turkey day. If you messaged me interested in a board, I'll message when I have all the boards made and tested. I do not foresee anything that will not make them work... but I'll keep you posted. Thank you for all the interest. P.S. Just thought of another test i wanted to do... so I'll try to run that test tomorrow. All my tests were on a hard modded 1.6 board... I do have a 1.0 board that is untouched. I'll see if it all works on that board... then I'll give the green light for the rest of the boards. Video:

Now that I tested it… I’ll try to get the gerbers uploaded tomorrow (later today after I sleep )

Made it in! Good luck to all! didn’t get an invite, got lucky with random codes they are posting on their Twitter If you didn’t get an invite, follow their Twitter today for codes

Rev 2 is done and works! So much easier than my Frankenstein approach

https://www.digikey.com/en/products/detail/adafruit-industries-llc/5433/16584075

Thank you. So far it is. Waiting on more stuff to ensure everything works (add on usb board and reset button to ensure you can upload firmware). Then I’ll test on my 1.0 board (vanilla… not modded in anyway… LPC holes still filled with solder)

First one built and working great!!! My new favorite! (Until stellar :))

Video of read function. I’ll make another later showing write function

It works!!! Read/write EEPROM (at least on a 1.6). All from microSD card. Fast and easy

No problem. I’ll let you know. Boards arrived today, but I’m on my way to Vegas. So probably Wednesday ish I’ll know if they work

I’ll have some EEPROM reader/writers soon (hoping next week). My initial batch (provided the first functions like my initial testing) for $20. + shipping just watch here:

All sold out

Thank you. I didn’t ground the casing for the oscillator. The boards would work… but I’d rather be safe than sorry And added more silkscreen

I’ll be making these soon (whenever my flash chips arrive). can’t wait! They’re SO small!