shawnunderse7en
-
Posts
2 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Calendar
Store
Posts posted by shawnunderse7en
-
-
On 5/7/2022 at 12:45 AM, Bowlsnapper said:
I was actually looking at the ACHI IR6000 as my first unit. Iˋm just worried about aligning the interposer by eye. Not looking forward to that at all... that and programming the heating profiles into the unit. Any guidance on alignment?
I thought I would be putting CPUs in Xboxes by now, but life circumstances keep putting it on hold and it sucks.
I would say if you can, get an IR-PRO-SC over the 6000, it will give you the ability to work on more consoles if you'd like down the road. I have one myself and been doing tons of PS3's recently. I can help you with a rough profile setup from what i've been using for my reballs!
- 2
Board Life Status
Board startup date: April 23, 2017 12:45:48
About to embark on the HD+ Hardware mod journey...
in Hardware Mods
Posted
Did one myself. Had to use my microscope and ensure everything was lined up so there was no bridging. Totally cooked first flex, so had to get a second one. As metioned, flux, lots and lots of flux and the opposite with solder. Not alot of soldering. You can tack things down and then drag soler to ensure everythinng is nice and set. I ended up using an angled tip which helped alot and ofcourse microscope made the process a whole lot easier. Definitely was way more challenging than your normal micro soldering for sure!