[XEcuter Pro 2.1 With No Dip Switches]

You guys did it. The 2.6 and 2.1 are the same connector it seems! Between jumping the correct pins and knowing what switches do what I got it to boot! Had to combined the mod chip enable, bp1,  bp2, and dip switch 2 pins all to ground.  Thank you for all the help! Now what to do next with it... haha. 

[XEcuter Pro 2.1 With No Dip Switches]

9 hours ago, bolofski said:

if you still have the dipswitch wire connected to the chip you may be able to get the chip to enable, theres some info here https://team-xecuter.com/community/threads/xecuter2-2-6ce-switch-schematic.23703/

Pins 1 & 4 - On if bank switch is set to 1, off if set to 2.
Pins 2 & 4 - On if chip is enabled, off if disabled.
Pins 3 & 4 - On if flash is protected, off if unprotected.
Pins 5 & 6 - On if chip is enabled, off if disabled.

I do still have the dipswitch wire connector, Iwill give this a shot, see what happens. that says its for the 2.6 though, you think the connectors are the same?

4 hours ago, KaosEngineer said:

Take a look at the diagrams for a few different chips shown here at ogXbox.com:

The Team Xecuter's X2.3b Lite, X2.2 Pro and X3 modchips' wiring diagrams are available there.

i did see this, unfortunately there is none for the chip i have. im not sure if the pins would be the same. heres a picture of my chip.

[Thepiratepimp Original XBox Collection]

awesome collection! its cool to see them all together like this

[I Bought an Unused Alpha Tower II Devkit Case]

these are super cool. personally id just keep it and display it with my collection.

[XEcuter Pro 2.1 With No Dip Switches]

Hello All,

I have a xbox that i picked up used, and it has a xecuter pro 2.1 (i believe) but it does not have the front or rear rs232 or DIP switch plates. When i boot i get an error of an unlocked drive, so I assume it is trying to boot to factory BIOS and it has a WD 120GB IDE drive in it. I tried to jump the D0 wire to ground as I read that would force it to use the xecuter's bios, and when I do that I get a greyscale screen that "xbox Linux Clean BIOS 1.22dev" screen that tells me to put in a disc. is this something i can do with Hexen? Thank you for any help