[Raspberry Pi Pico Xbox EEPROM Dumper]

I think PicoProm may need a few things to get running, look at the list below, and you still need to wire it to an EEPROM (no way around it!). It has way more features but I don't see how its simpler to setup if you just want the password for your HDD.

1. Disconnect the Raspberry Pi Pico from power/USB
2. Wire the Raspberry Pi Pico up to the EEPROM according to the pinout table below
3. Connect the Raspberry Pi Pico to the computer by USB
4. Launch a terminal app with XMODEM support, such as Tera Term, and connect it to the Raspberry Pi Pico
5. Verify that the Raspberry Pi Pico is reporting that it's ready to receive a ROM image
6. Use your terminal to send a ROM image using the XMODEM+CRC protocol
7. Disconnect power before removing the EEPROM from the circuit

[Raspberry Pi Pico Xbox EEPROM Dumper]

 

This video is a quick way to dump your original Xbox eeprom directly from the motherboard with just a Raspberry Pi Pico. The code is written by myself in micropython and posted on Github. All you need is a soldering station and 24-30 gauge wire ( or a scrap usb cable you can cut up). This video is handy if you're trying to revive an old Xbox or unlock its HDD. The dump only takes a few seconds, and requires only 3 wires to be soldered from the Pico to the Xbox. 

Everything that you'll need:

-Github Posting

https://github.com/maxpower5544/Pico-ogxbox-eepromdumper

-Raspberry Pi Pico 

https://amzn.to/47CXUfe

-Solder Station Kit

https://amzn.to/47CP3dB

-26 Gauge Wire

https://amzn.to/3vFO3Ir

-Breadboard

https://amzn.to/3tUOiyG

[Video Guide - Complete Softmod & TSOP Flashing (Sharp & Winbond included)]

https://youtu.be/5V48rYfqE6E

This guide is a start to finish how to softmod a xbox (upgrade a softmodeded hdd too) and also how to TSOP flash any xbox (excluding mb v1.6) including flashing winbond & sharp tsop chips. All the files needed are included in the video description. I DIDNT MAKE ANY OF THE TOOLS FULL CREDITS GO TO THE DEVS, I just collected them all in one place. 

 

[Video Guide to Softmod or Hardmod any Xbox Winbond&Sharp included and Upgrade HDD (NEW!!!! Transfer files directly to HDD from PC)]

 

[Softmod and 2tb Install Guide]

This video goes over how to softmod & install 2tb HDD then use rocky5 emustation dashboard. All links in the description!!

[2tb In Softmod Classic]

https://youtu.be/dearT4bEEqQ

I just posted this video goes over the whole process of installing a 2tb HDD in a softmod xbox