Jump to content
OGXbox.com

the415giant

Members
  • Posts

    15
  • Joined

  • Last visited

Posts posted by the415giant

  1. I bought the Kingwin adapter and the cablesonline ide cable both on amazon and I installed them successfully to upgrade my original modded Xbox v1.0  hdd to 2tb’s. No cloning just a fresh install and then I ftp‘d  my ISO’s. Used truhexen 2020, no issues. 256 bios for v1.0,  Ind Bios 5004 f and G. 

  2. 1 hour ago, dertio said:

    Zup bro, just for say thanks for the work now my Xbox is alive

     

    I got a shattered 1.6 really cheap, after 1 year is like new, new case, DVD drive working, aladdin chip installed and a 128gb hdd(this is Provisional) I waiting the sata2IDE converter and put a 500gb hdd) also when I bought this the motherboard was pre hacked with wires so this just need a chip and that's it, anyway I flash the noDVD check bios thinking on the next update... So right now what's next?, just copy a lot of games to the hdd? Install emulators or use like media center I dunno this is a new word for me

     

     

    I used truhexen 2020 to upgrade my hdd, went from a 200gb to a 2 tb, no issues whatsoever, I’m happy, I’m ftp’ing my ISO’s at the moment, halfway done, got about another 70 games to go. As far as dashboards it installed unleash and evox, got my emulators transferee and I can’t complain. Even got xbmc, yeah in unleash dash you can’t enter xbmc unless you go to applications but hey it’s just a push of a few buttons, Thanks to everyone in here for their input. 

  3. On 8/12/2020 at 11:22 PM, sweetdarkdestiny said:

    Sry but i'm bussy with a xbox which get's a instand hot gpu because of changing caps (So wierd). 

    So do it like Dave already wrote it's pretty simple and here is a video which show you the same: https://youtu.be/Rz7JHGkPBu0?t=564. After you set up your new hard drive you can flash a new bios (IND-5004.67) and you are ready in case you will swap your drive for the 2tb one. And from there just start over with the hexen disc again. 

    Note: When you put a 2 TB had in your box make sure to format your drive twice. Formate - Reboot - Format again. Reason why is cuz XBpartitioner has a little bug with 16/64 kb cluster. In the first run the tool is not able to format the first pation with 64kb cluster.

    I formatted the drive and then rebooted, and it takes me to the hexen menu, how do I format it a second time? 

  4. So I opened up my Og Xbox to give it a good cleaning and replace the thermal paste, thought I’d show a pic of the mod chip, was wondering which chip it was and if it’ll make any difference to the process of upgrading my hard drive or if it’s all good. Thanks. 

     

     

    13A29DB4-A107-4277-9AE1-637163416E98.jpeg

    6A26E7EA-401F-45B4-B465-B60501078D53.png

  5. now i'm considering my 2tb hdd, i'm gonna order the ide adapter and the 80 pin ide cable if they're available. After i format the 2 tb drive twice, i just need to know how exactly do i flash the new bios? I know the hexen 2019 has a few different options, which one should i use? 
    3.2 not winbond or 3.3 winbond or sharp flash? Or 3.5? Im sure there are other options on the next screen after I make this choice. Thanks again. 

    93B36907-40AF-4196-AACB-B6C1108DBEAF.jpeg

  6. I have a 200gb now, and looking into a 320 or 500 gb ide drive, i also have a 2tb sata, but i rather not get the adapter and new cable. So if it's under 1tb, how would i install it? i have watched a few videos on it, but haven't seen my exact setup, do i have to clone the original drive to the new one or just install the new one and ftp everything from my backup on my pc? How do i go about upgrading a new hdd? Thanks for your response.

  7. I have a v1.0 original modded Xbox, it had an old Aladdin mod chip, I wanted to upgrade the hard drive and after doing some research I found out I can brick it by flashing a new bios. The bios is unknown but after running bios checker it reads I have a lpc sst49lf020, it boots up xecuter2 into an evolution x dashboard. If I use the hexen 2019 disc, what steps can I take after I install a larger hdd? I don’t need to clone it, I backed up everything using ftp, and I want a fresh install. Here are some images that may help...

    Thanks for your time. 

    877F4EBE-3541-461F-9963-12C7928BBDD8.jpeg

    3529393D-1CA1-47B6-B086-D3A11E1C6FBD.jpeg

    16AA6C48-CDB4-4C63-83D5-48B5BD2A0057.jpeg

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.