Jump to content
Sign in to follow this  
heya

Test

Recommended Posts

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

Board Life Status


Board startup date: April 23, 2017 12:45:48
  • Similar Content

    • By chipntschip
      Xbox_Controller_Tester.rar
    • By MarkS
      Hi all,
      My trusty old XBox has stopped powering up (no lights or drive activity, nothing). I have opened it up to check for leaking caps. It is a 1.0 or 1.1 version, so I checked the clock capacitor which had indeed leaked so I removed it and cleaned the pcb but still no joy. 
      Then I started testing the FoxLink PSU. The socket soldering looks ok and I found that at least the 1st coil has tension, but when measuring the pins on the mobo connector there is nothing (I also measured the Power OK and Power ON pins). I can’t see any visual damage on the PSU. Can I conclude that this PSU is dead or is this normal? 
    • By James Scriver
      I've got a 1.6 with good traces that won't power on. If I hold the power button in I can hear the HDD spinning but nothing else happens, no video output, the led's don't light up, nothing.. Before I go about ordering the replacement transistor for the mb, I'd like to test the psu to make sure it's working, and I don't have any other 1.6's around to try it out in.
      I've been looking around online for 45 mins and can't find anything specific to testing the psu for correct voltage (it's a Delta if that matters, and everything looks flawless on it, no obvious problems.)
      If anyone can help me out with this, or has another idea of what may be the problem, I'd appreciate it immensely (and yes I have a multimeter handy :P)
      Cheers,
      Jim
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.