AlaskaCC Posted December 28, 2022 Report Share Posted December 28, 2022 The X3 on top works perfectly. The one on the bottom gets smoking hot and will not boot. I am guessing there is a short to ground but not sure what to check. Any ideas? What typically fails on these? Quote Link to comment Share on other sites More sharing options...
prtscn Posted December 28, 2022 Report Share Posted December 28, 2022 Probably was plugged in the wrong way, this is what i did, and actel chip got REKT. My chip heats up as well. Possible solution would be to replace actel chip, since you have working one. I bet there is a way to dump data from working chip if needed, not sure. Quote Link to comment Share on other sites More sharing options...
Prehistoricman Posted December 28, 2022 Report Share Posted December 28, 2022 1 hour ago, prtscn said: Probably was plugged in the wrong way, this is what i did, and actel chip got REKT. My chip heats up as well. Possible solution would be to replace actel chip, since you have working one. I bet there is a way to dump data from working chip if needed, not sure. If the CPLD is replaced, the new one would need programming with the open-source R3DUX code at https://github.com/ChimericSystems/R3DUX The original Xecuter code isn't available for extraction from the device, nor available online. 1 Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted December 28, 2022 Report Share Posted December 28, 2022 The CPLD on the X3 modchip is not an Actel AP075. It was re-labeled by Team Xecuter to thwart others from cloning. It is a Lattice LC4256V-75T100C; however, now obsolete - no longer manufactured. I'm not sure which currently produced part is a good replacement part. 2 Quote Link to comment Share on other sites More sharing options...
AlaskaCC Posted December 28, 2022 Author Report Share Posted December 28, 2022 Thanks for the responses. It sounds like more than I want to take on right now. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.