adding xiso unmount button/entrie to xbmc skin

[prtscn]

using JX 720 skin, it has tray button - open and close, and run .xbe file from the disk. So i guess there is a way to make a button that activates unmount .xbe file.

I managed to add custom entries like for Homebrew, etc. Really cool thing to have entrie like that, but instead of opening homebrew folder, it activates .xbe file which unmounts xiso.

[prtscn]

found a solution, replaced window command with this below:

<onclick>XBMC.RunXBE(E:\Apps\detach\default.xbe)</onclick>

But XISO are not that dandy as i thought.

Slower reset speed, require to reset again when using detach.xbe to detach XISO file.

Using this method for all games IMO is not that optimal. Maybe use only with those games with long file names.

[Rocky5]

Demounting isn’t required. It’s optional and it does add to the back to dash feature. But it’s only a second or 2 longer. (If using dashloader)

 

But it’s not required, just turn off auto boot Xbox games from the dashboard and you won’t have any issues. 

[prtscn]

3 hours ago, Rocky5 said:

Demounting isn’t required. It’s optional and it does add to the back to dash feature. But it’s only a second or 2 longer. (If using dashloader)

 

But it’s not required, just turn off auto boot Xbox games from the dashboard and you won’t have any issues. 

When XISO is attached, soft reboot time is significantly longer - 2 times longer, about 14 seconds. Yes, i double tested it, its about 2 seconds penalty, not a big deal, but with xiso attached is evident.

If you mean autorun media, yes i tried to uncheck it, but i did not notice any improvement. Since xiso is always attached, unless detach .xbe is run.