Jump to content

Report

  • Similar Content

    • By Emiougus
      My V1.1 Xbox is triple fragging, this happened after I tried swapping out the 40 Pin IDE cable for a 80Pin one. 

      I've done a bit of debugging and found that the LPC header pins 3 and 5 aren't reporting correct voltages both reading below 1v
      What I think has happened is when I installed the 80 Pin IDE cable I without knowing freed up one of the solder joints on the switch that's on the XeniumICE which switches it into recovery mode(I have resoldered the broken joint and it didn't change anything and yes the switch is in the correct position, though I've tried both positions and still a frag) and somehow that's caused something to get fried but I'm not sure what exactly
      Uploaded some pictures of my LPC header soldering and D0 point for shits and giggles I have done continuity tests to the alternate points and they're all reading with continuity 
      https://imgur.com/a/rBbAdlR
    • By technoob
      Sorry for opening another topic so soon, with the other one un-replied, I just needed to know how to properly manage the upload of roms and emulators on a hard-modded Xbox with Slayers 2.7 as default dashboard.
      Basically, I got a lot of roms and some good new emulators (alongside the ones which were already installed with the dashboard). Where do I put each roms (they're a lot of stuff)? Do I need to make folders like "Nintendo 64", "Nes", etc.. asking you this because there's a "Roms" folder in "F:" drive but many of the files can have the same name (as they're usually in .zip format). Do I have to place the roms in specific folder of the emulator  or there's a specific setting to follow ? Should emulators be uploaded in "Emulators" or "Games" folders ?  thanks
    • By gt46l
      So I was looking back into Xbox emulation to see how it has progressed, and Xemu claims it can play 62% of the games library now.  I was reading up on how it works and you can command line load an iso, but it doesn't support compressed isos so I'm not interested in that method.  It does also support Xbox hard drive images however, and custom dashes.  I'm curious if anyone has used xboxhdm to create a hard drive image with one of the hard drive ready rom sets out there and a custom dash to play them in Xemu?  Xemu doesn't specifically piece this all together for you on the website, but it seems that should work.  Either way I'm going to try it, but just didn't know if anyone knows. 

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.