Maverick0984 Posted November 30, 2018 Report Share Posted November 30, 2018 With help from some others, I was able to get this chip flashed a 1.6 compatible BIOS hotswapping it into a 1.0 xbox and that went well. I thought I completed the physical install of the chip into the Xbox and things went smoothly. I had an old X3 LPC rebuild board that was unused so I soldered in the pin header and used the rebuild board to rebuild the LPC. I then soldered the spot on the rebuild board marked D0 on the modchip to D0 on the rebuild board (soldered to the location on the motherboard). I go to power on the Xbox and it boots immediately if the modchip is placed on the pin header if connected to power but currently off. It boots immediately if modchip is already on the pin header and I plug in power. Both boot to MS Dash with no signs of the chip being powered on or functional. Xbox would work as stock without any issue, I"m assuming. If modchip is removed from pin header and plugged in. I have to hit power button as normal but Xbox boots up as normal. Any idea what could be causing the Xbox to auto-boot when the modchip is in place? I've run out of ideas and documentation/youtube videos/random forum posts that I've found are either gone from the internet, or a slightly different scenario rendering the info useless. I did NOT do anything with the LFrame trace. Quote Link to comment Share on other sites More sharing options...
Maverick0984 Posted December 1, 2018 Author Report Share Posted December 1, 2018 Looks like the answer to this was not connecting D0 and cutting the LFrame trace. It worked after I did that. 1 Quote Link to comment Share on other sites More sharing options...
dragonpd Posted December 29, 2018 Report Share Posted December 29, 2018 good info. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.