booyabeetz Posted October 24, 2022 Report Share Posted October 24, 2022 14 hours ago, Dtomcat18 said: Updated my Github with more information (getting there)... This update is the pinout for each connector (other than controller port connector... already out there). https://github.com/dtomcat/OGX360I-4CH/blob/master/Wiring/Pin Signals.md Nice! This clarifies a lot. Quote Link to comment Share on other sites More sharing options...
Shadow07 Posted October 31, 2022 Report Share Posted October 31, 2022 Do you have a BOM? Quote Link to comment Share on other sites More sharing options...
dtomcat Posted October 31, 2022 Author Report Share Posted October 31, 2022 Not yet. I will post something this week. It’s next on the list. 1 Quote Link to comment Share on other sites More sharing options...
booyabeetz Posted October 31, 2022 Report Share Posted October 31, 2022 (edited) 57 minutes ago, Shadow07 said: Do you have a BOM? This is kind of why I actually started with the 2-channel variant for this. The repo has the BOM with Digikey quick links etc. In any case most of the components overlap with the 4-channel variant so I guess you could infer the 4CH BOM that way: https://github.com/bolwire/OGX360I-2CH/tree/master/Hardware/OGX360I-2CH Main Personally I will probably wait for updates from Dtomcat18 before I order anything for the 4CH. Edited October 31, 2022 by booyabeetz Quote Link to comment Share on other sites More sharing options...
Shadow07 Posted October 31, 2022 Report Share Posted October 31, 2022 12 hours ago, Dtomcat18 said: Not yet. I will post something this week. It’s next on the list. 11 hours ago, booyabeetz said: This is kind of why I actually started with the 2-channel variant for this. The repo has the BOM with Digikey quick links etc. In any case most of the components overlap with the 4-channel variant so I guess you could infer the 4CH BOM that way: https://github.com/bolwire/OGX360I-2CH/tree/master/Hardware/OGX360I-2CH Main Personally I will probably wait for updates from Dtomcat18 before I order anything for the 4CH. Sweet thanks to both of you. Can't wait to build one of these things. Quote Link to comment Share on other sites More sharing options...
booyabeetz Posted November 1, 2022 Report Share Posted November 1, 2022 (edited) 19 hours ago, Shadow07 said: Sweet thanks to both of you. Can't wait to build one of these things. I forgot to mention that I also started out building the regular/original ogx360 before I tried to make the 2-channel internal. The original is easier to make and so it's a better starting point if you do not have a lot of experience soldering etc. The 2CH/4CH internal variants also have components that are intended to be mounted using a hot air station or hot plate (such as the oscilator crystals and micro-usb connectors) whereas the regular ogx360 can be done entirely with a soldering iron. Just a heads up: https://github.com/Ryzee119/ogx360 Edited November 1, 2022 by booyabeetz Quote Link to comment Share on other sites More sharing options...
dtomcat Posted November 1, 2022 Author Report Share Posted November 1, 2022 BOM posted! Enjoy https://github.com/dtomcat/OGX360I-4CH/tree/master/BOM 2 Quote Link to comment Share on other sites More sharing options...
dtomcat Posted November 3, 2022 Author Report Share Posted November 3, 2022 @booyabeetz new board ordered with update for different clamshell Quote Link to comment Share on other sites More sharing options...
booyabeetz Posted November 3, 2022 Report Share Posted November 3, 2022 1 hour ago, Dtomcat18 said: @booyabeetz new board ordered with update for different clamshell Awesome! I meant to suggest adding the component information to the silk screen but it looks like you were thinking the same. Good stuff! Quote Link to comment Share on other sites More sharing options...
dtomcat Posted November 3, 2022 Author Report Share Posted November 3, 2022 Yea… meant to on the last set Quote Link to comment Share on other sites More sharing options...
seahound08 Posted November 6, 2022 Report Share Posted November 6, 2022 I appreciate the work that went into these, but I lack the savvy to build my own. Is anyone selling them? Quote Link to comment Share on other sites More sharing options...
dtomcat Posted November 15, 2022 Author Report Share Posted November 15, 2022 On 11/2/2022 at 10:19 PM, booyabeetz said: Awesome! I meant to suggest adding the component information to the silk screen but it looks like you were thinking the same. Good stuff! Rev 2 is done and works! So much easier than my Frankenstein approach 1 Quote Link to comment Share on other sites More sharing options...
booyabeetz Posted November 15, 2022 Report Share Posted November 15, 2022 3 hours ago, Dtomcat18 said: Rev 2 is done and works! So much easier than my Frankenstein approach Looks great! I will probably build this jig as well if you ever get around to publishing the gerber file on your repo. Quote Link to comment Share on other sites More sharing options...
dtomcat Posted November 15, 2022 Author Report Share Posted November 15, 2022 4 minutes ago, booyabeetz said: Looks great! I will probably build this jig as well if you ever get around to publishing the gerber file on your repo. Now that I tested it… I’ll try to get the gerbers uploaded tomorrow (later today after I sleep ) 1 Quote Link to comment Share on other sites More sharing options...
66dutch Posted December 2, 2022 Report Share Posted December 2, 2022 Did you manage to upload the gerbers for your Rev 2 Programmer board? Would be very keen to make one up Quote Link to comment Share on other sites More sharing options...
dtomcat Posted December 2, 2022 Author Report Share Posted December 2, 2022 I doubt it lol. I’ll try this weekend Quote Link to comment Share on other sites More sharing options...
dtomcat Posted December 2, 2022 Author Report Share Posted December 2, 2022 I keep getting questions about the availability of the ogx360(i). Unfortunately I do not have anymore and have no plans to make any more for the foreseeable future. If I do make more … I’ll post here and let everyone know. Thank you for your interest. Quote Link to comment Share on other sites More sharing options...
dtomcat Posted December 3, 2022 Author Report Share Posted December 3, 2022 5 hours ago, Dtomcat18 said: I doubt it lol. I’ll try this weekend https://github.com/dtomcat/ATMEGA32U4-Programmer/blob/main/Hardware/ATMEGA32U4_Programmer_2022-12-03.zip 1 Quote Link to comment Share on other sites More sharing options...
66dutch Posted December 3, 2022 Report Share Posted December 3, 2022 On 12/2/2022 at 3:09 PM, Dtomcat18 said: I keep getting questions about the availability of the ogx360(i). Unfortunately I do not have anymore and have no plans to make any more for the foreseeable future. If I do make more … I’ll post here and let everyone know. Thank you for your interest. I'm working on making a set - if it goes well, I may be open to making more. Quote Link to comment Share on other sites More sharing options...
meyer64 Posted January 30, 2023 Report Share Posted January 30, 2023 I'm very interested in a 4ch internal if they are available for sale. Will these be available again? How can I purchase a kit? Quote Link to comment Share on other sites More sharing options...
dtomcat Posted February 5, 2023 Author Report Share Posted February 5, 2023 I’ve considered making more… but it would be at least a month or two. If not longer. Sorry Quote Link to comment Share on other sites More sharing options...
Geeba Posted February 9, 2023 Report Share Posted February 9, 2023 So just another quick question, not a noob but been out of Xbox really since Kodi came around - did CoinOps for a while but nothing of late.. These boards allow wireless controller use? can later XB One type controllers also work? Quote Link to comment Share on other sites More sharing options...
dtomcat Posted February 11, 2023 Author Report Share Posted February 11, 2023 I’m not sure which controllers work. There is a list on the original ogx360 GitHub Quote Link to comment Share on other sites More sharing options...
booyabeetz Posted March 11, 2023 Report Share Posted March 11, 2023 On 12/2/2022 at 10:24 PM, Dtomcat18 said: https://github.com/dtomcat/ATMEGA32U4-Programmer/blob/main/Hardware/ATMEGA32U4_Programmer_2022-12-03.zip Thanks again for making the gerbers for this board available. I finally went ahead and placed an order for some pcbs so I can have one of these nice programming setups for my collection. This will also let me free up my breadboards for other projects. Once complete I think I will start looking into making a 4CHi for my collection as well. Quote Link to comment Share on other sites More sharing options...
dtomcat Posted March 22, 2023 Author Report Share Posted March 22, 2023 You’re welcome! Glad it can help! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.