xxgreg27xx Posted November 12, 2018 Report Share Posted November 12, 2018 I just got a xbox with a xecuter 3 in it and it has a lcd monitor that lights up but doesn't show anything on it. any common problems? is it worth trying to fix? 1 Quote Link to comment Share on other sites More sharing options...
dbrown1986 Posted November 12, 2018 Report Share Posted November 12, 2018 (edited) Most likely there are solder joints which are not making a reliable electrical connection (cold joints). These may need to be reflowed with an iron to make a more stable connection between the X3 and the LCD. It's been forever and a day since I had an X3, so I'm not 100% sure, but you could check the X3 Config Menu (power on the xbox with both Power + Eject pressed) and see if there are any relative options there. as it could just be as simple as it not being enabled. Edited November 12, 2018 by dbrown1986 1 Quote Link to comment Share on other sites More sharing options...
AlaskaCC Posted November 12, 2018 Report Share Posted November 12, 2018 Pressing and holding the white button on the controller at startup will take you to the X3 menu where you can look at the LCD options. 1 Quote Link to comment Share on other sites More sharing options...
Brennyg Davies Posted November 13, 2018 Report Share Posted November 13, 2018 Most likely lcd is switched off ? Boot console while holding white button, Iain settings switch on lcd and boot to dash, you can also alter text on screen plus alter brightness. 1 Quote Link to comment Share on other sites More sharing options...
John7272 Posted November 13, 2018 Report Share Posted November 13, 2018 your dashboard must have LCD support, I have always used XBMC. it does need to be enabled in XBMC options or only the backlight will illuminate. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.