Jump to content

Recommended Posts

1. Xbox motherboard 1ghz CPU and 128mb Ram: 100€

Please login or register to see this attachment.

2. Rev1.6 Motherboard- Aladdin Chip and internal HDMI mod with 5.1 digital Audio support: 90€

Please login or register to see this attachment.

Here's a youtube review comparing my HDMI mod to a component cable and a normal AV-cable. It's in german but the video quality comparison should be clear enough.

3. Xbox Alpha Development kit soundcard: 35€

Please login or register to see this attachment.

 

Edited by N64 freak
  • Like 3

Share this post


Link to post
Share on other sites

You do great work, no doubt. I have a 1Ghz board from you on my bench, and another from someone else.

Your work is much cleaner, I am interested in another of your 1Ghz boards.

Do you glue the heat sinks on? Do you ship to the U.S.?

Share this post


Link to post
Share on other sites

No, the heatsinks are removable just like on the stock cpu. I do use normal thermal paste so the heatsink can be removed even easier as on a stock console.

Shipping to the USA is no problem. I'll simply send you a PM about the shipping costs!

Share this post


Link to post
Share on other sites

@RoofTop Glad you like your modded board. Allways a pleasure to make someone happy :)

 

@DarylWise Yes, i do. But i only sell the internal sets anymore. I discontinued the external version some time ago. I should have 3 DIY install sets ready. BUT they aren‘t too easy to install. If you only started soldering they aren‘t to be recommended.

Share this post


Link to post
Share on other sites
2 minutes ago, N64 freak said:

@RoofTop Glad you like your modded board. Allways a pleasure to make someone happy :)

 

@DarylWise Yes, i do. But i only sell the internal sets anymore. I discontinued the external version some time ago. I should have 3 DIY install sets ready. BUT they aren‘t too easy to install. If you only started soldering they aren‘t to be recommended.

I've never soldered in my life lol. Are you currently allowing XBOX units to be shipped to you for installs?

Share this post


Link to post
Share on other sites

I sent you a PM about it!

And for the record i only accept consoles to be shipped to me if they are from within europe. Our customs office is a pain and i don‘t want to drive there again and again telling them why i import another xbox...

Share this post


Link to post
Share on other sites

If the buyer is in the U.S.,  I can purchase an xbox, and install the HDMI mod for free. if the kit is mailed to me.

I will clean the board 100%, and remove the clock cap. Any failing capacitors will be replaced with better ones. New Arctic Silver 5 heat sink compound. controller ports and connectors cleaned with CRC cleaner. TSOP flashed. Working DVD drive

I would only require $50 to cover the xbox and supplies.

$75 extra to have the hard drive upgraded to 2TB SATA.

This is my hobby, and I trolled the forums for years to obtain all of my information and software. So I owe it to help others while the scene is disappearing. I only need parts, supplies and shipping covered.

Share this post


Link to post
Share on other sites
14 minutes ago, John7272 said:

If the buyer is in the U.S.,  I can purchase an xbox, and install the HDMI mod for free. if the kit is mailed to me.

I will clean the board 100%, and remove the clock cap. Any failing capacitors will be replaced with better ones. New Arctic Silver 5 heat sink compound. controller ports and connectors cleaned with CRC cleaner. TSOP flashed. Working DVD drive

I would only require $50 to cover the xbox and supplies.

$75 extra to have the hard drive upgraded to 2TB SATA.

This is my hobby, and I trolled the forums for years to obtain all of my information and software. So I owe it to help others while the scene is disappearing. I only need parts, supplies and shipping covered.

In talks with N64Freak right now, but I will get in touch with you soon. Thanks.

Share this post


Link to post
Share on other sites

Hi N64Freak

I am keen on the HDMI mod if you have some available? As for fitting I don't think I would have any problems as I have been repairing car audio units including replacing 100 pin main micros which other places said could not be done for the last 30+ years. The audio on your HDMI kit I assume is getting a digital signal not the analog and the video signal would be RGB from the main PCB is this correct?

 

Cheers SS_Dave

 

Share this post


Link to post
Share on other sites

Hi there N64 freak,

Similar to Dave, I'm also interested in the HDMI kit. Could you pm me if you have these still available? Many thanks and happy holidays!

Jerx

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


Board Life Status


Board startup date: April 23, 2017 12:45:48
  • Similar Content

    • By Frank D'Agostino
      So a member of the group was asking for a Dport to dport wire he was asking other members if they had one available because he had one of those LCD screens that go on top of the Xbox and use a proprietary wire that connects from the Xbox to the intec inc screen.. I told him it was easy enough to make that it was just a few wires he could not be bothered. This got me thinking maybe I should make an easy-to-follow schematic for this. I did not do any YouTube searches or Google searches. I clearly went off my HDMI schematic and figured out the rest for myself. There was an image going around that shows the dport but it is backwards it shows the front view so in this image you will see that it's been deciphered so it's easier to follow well soldering. I did make one of these wires and had great success I used all brand new hardware that I purchased a little while ago. It is working great very basic wiring. I'm pretty sure this LCD does not provide video over 480i I think that's pretty much the max resolution I could be wrong on that this wire is designed to Output in 480i or your typical composite video signal. This pinout / schematic can potentially save a lot of money. I have not seen one of those wires alone on eBay it always comes with the screen so if somebody is looking for that wire it could be very costly pretty much what they want to pay for it. Not only that the same schematic can apply to somebody who has an RCA entertainment series Xbox Ready TV which has the proprietary dport input. In order to make this wire you can follow the diagrams exactly. Just make sure you add a few extra feet to the length in between. I know I bought one off Amazon and I think it cost me around 35 with shipping. This wire can be easily made from 2 $5 RCA wires. The schematic itself was made and designed by me maybe that's why it does not look the absolute greatest. I'm more of a Hands-On guy than the computer guy so I apologize but it looks pretty self-explanatory easy-to-follow what you do on one end you want to do on the other end. You should be fine the only concern is the jump wire pin 8 to pin 20... I have found if you only do one of the Xbox connections with this jump that connection has to be the one that's plugged into the Xbox itself. If you hook it up the other way around it will not display. So you can either remember to always plug that one in your Xbox or just make sure you jump both sides on both connectors. In order to not have to worry about that. In any event I hope somebody somewhere can benefit from this schematic took me a couple hours to wire up in a couple hours to make the schematic itself. But if it helps at least one person in the community save money than it was totally worth it 🙂 4 wire I just used regular RCA's. I'm guessing if you wanted the best kind of quality on this you can always use Xbox 360 shielded component cable wire since that is a high build grade for sure..for 5.1 audio out just tap into pin #3 ...thank you very much
      Frank
      Please login or register to see this attachment.
      Please login or register to see this attachment.
    • By Hector Hidalgo
      Hi guys,
       
      Does anyone has any idea if a skin exist with cover support? I mean, but on a size specifically for CRT TV's? 4:3?
       
      The problem I am having is that most dashboards with cover support are made specifically for widescreen HD TV's, I am fine with that, but I use my Xbox exclusively on my Sony Wega CRT. It looks amazing because it has component inputs (I am about to build my component cable though).
       
      To me, this consoles are made to play on 4:3 on a good CRT, so ideally I would want a skin or a dashboard where I could see what I am doing! I don't think I am the only one! On a CRT Xbox4gamers looks tiny and is terrible to use. UnleashX is the perfect size for CRT's but I haven't found a skin that supports covers!
       
      Anyone knows of such a thing?
       
      Thank you guys, thank you all for your time and patience.
       
      Hector.
    • By Lee5
      Also interested of incomplete/faulty kits. Please, let me know if you have one for sale.
      I'm located in Finland, Europe.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.