XB84 Posted June 21, 2022 Report Share Posted June 21, 2022 Hi, I'm currently try to install strip led lights in my OG crystal case, it need a 12v source. IV tryed the 12v direct from the power supply board and also from a hard drive power splitter. The problems I'm have is it keeps blowing MOSFETs on the motherboard? Is there a limit to how many LEDs can be installed? Thanks Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted June 21, 2022 Report Share Posted June 21, 2022 At the hard drive 4 pin connector the black wires a 0 volt (ground ) and the yellow wire is 12 volt are the only connections you need. It should not blow and transistors on the main board. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.