Getting xISO patcher to work with XboxHD+ patched M8+ BIOS

[SoftMachine]

I'm having some trouble getting both of these working at the same time; I have a M8+ 1.6 BIOS pointing to Rocky5's xISO patcher, which works fine, but when I try to pack it with XboxHD's patch and run it, it doesn't show up in the XboxHD app. This happens using both the edited or clean M8+ images as a base when packing it again. If I don't load the xISO patcher, the XboxHD patch shows up fine in the app. I'm wondering if there's a way around this or if anyone else has gotten these to work together.

[KaosEngineer]

The order of applying all of the patches matters.  The XboxHD patching app requires a stock xbins distribution of the BIOS to apply its patch.

Which or from where was the M8+ 1.6 BIOS obtained?

 

To point to the XIOS patcher app, nothing needs to be changed in the base xbins distribusion of the M8plus v1.6 BIOS. It already has c:\evoxdash.xbe as the first item in the boot order list.

[SoftMachine]

On 6/13/2022 at 10:39 PM, KaosEngineer said:

The order of applying all of the patches matters.  The XboxHD patching app requires a stock xbins distribution of the BIOS to apply its patch.

Which or from where was the M8+ 1.6 BIOS obtained?

 

To point to the XIOS patcher app, nothing needs to be changed in the base xbins distribusion of the M8plus v1.6 BIOS. It already has c:\evoxdash.xbe as the first item in the boot order list.

Hey you're right, I found that evoxdash replacement xbe you posted a while back and just used that without messing around in evtool, everything worked fine. The bios was clean, I was trying to enable F+G but ended up using one off an OGXbox disc anyway. Probably should have read through more old threads though, I appreciate it.

Edited June 17, 2022 by SoftMachine