Jump to content
OGXbox.com

Homemade xbox component cable not outputting green and red


jstones4321
 Share

Recommended Posts

I made some homemade og xbox component cables using og xbox av cables and xbox 360 component cables. At first the homemade cables didn't work as I had read the diagram backward. Eventually it worked with what I assumed was fine colors until I took some comparison photos. Once going into xbmc, I noticed that colors were missing, specifically green and red.

I've checked all the connections with a multimeter to make sure they go to the correct output. I also checked with a multimeter to make sure nothing was bridged. Everything appears "fine".

https://drive.google.com/drive/folders/1p4oX9jJtl0ok6f0cWt4hHe7HL04pc1k8?usp=sharing

That's some photos showing a comparison photo of my pound hdmi vs my homemade component cables and the connector itself for the component cables.

Any advice on what could be happening would be appreciated.

 

edit: Everything is ntsc, incase that's relevant information

Edited by jstones4321
Link to comment
Share on other sites

Well I solved the issue. Turns out I did the bottom half backwards. I realized this when I tested just the white audio and nothing came out. Should've checked that sooner.

I got confused when flipping the connector around so red was in the wrong place. Interesting to see how I only got red colors when it was the one miss placed the entire time.

Thanks for letting me post this. I've learnt an important lesson, check the audio when doing this.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.