Jump to content
OGXbox.com

Xbox Communicator Adapter Compatibility


Aero_105
 Share

Recommended Posts

I purchased a xbox communicator adapter hoping I would be able to use a stereo 2.5 mm plug.  I am unable to fit the plug to the adapter b/c of raised edge interference.  I rather use what I have if possible.  What are my options?  Do I disassemble the adapter leaving half intact.  Do I file down the raised edges so the jack is flush.  Does anyone know where I can get an old mono headset with mic used for cell phones 2.5 mm plug?  Does anyone know if there is a 2.5 mm cable extension that would fit or is it all proprietary.  I am having difficulty disassembling the communicator adapter, it seems to catch at the top,  I don't know why. Has anyone disassembled one before?

adapter1.jpg

adapter2.jpg

Link to comment
Share on other sites

I got the adapter apart, there are two clips near the top.  I ended up using a circular sanding disc to file down the edge with the chipboard out.  I used car touch-up clear coat.   It should work .  The connector now fits.  I ended up using a cell phone earbuds with mic and soldered a 2.5 mm stereo plug.  It was difficult to solder as the wires are small and they had a insulating coating on them.

adapter3.jpg.6cc35364680467d6c389eb5a3c36bede.jpgadapter4.jpg.fbfd1e27dfdbf31bd32f4a7b802357ef.jpg

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.