Aero_105 Posted April 8, 2022 Report Share Posted April 8, 2022 I purchased a xbox communicator adapter hoping I would be able to use a stereo 2.5 mm plug. I am unable to fit the plug to the adapter b/c of raised edge interference. I rather use what I have if possible. What are my options? Do I disassemble the adapter leaving half intact. Do I file down the raised edges so the jack is flush. Does anyone know where I can get an old mono headset with mic used for cell phones 2.5 mm plug? Does anyone know if there is a 2.5 mm cable extension that would fit or is it all proprietary. I am having difficulty disassembling the communicator adapter, it seems to catch at the top, I don't know why. Has anyone disassembled one before? Quote Link to comment Share on other sites More sharing options...
Aero_105 Posted April 9, 2022 Author Report Share Posted April 9, 2022 I got the adapter apart, there are two clips near the top. I ended up using a circular sanding disc to file down the edge with the chipboard out. I used car touch-up clear coat. It should work . The connector now fits. I ended up using a cell phone earbuds with mic and soldered a 2.5 mm stereo plug. It was difficult to solder as the wires are small and they had a insulating coating on them. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.