Mauroz79 Posted March 31, 2022 Report Share Posted March 31, 2022 Greetings to all, I have an xbox classic 1.0 that they gave me. As soon as I tried to turn it on the initial boot appeared, but then I heard a noise like something sizzling coming from the power supply. I open the xbox and I noticed some screws springs on the power supply which probably caused a short circuit. Now the console does not turn on anymore. If I try to turn it on, the fan turns half a turn and turns off. In stand by I have 3.25 volts on the purple cable while the transformer on the secondary between the red and black cable gives me 0 volts. What could I check. Thank you Quote Link to comment Share on other sites More sharing options...
Lina_Inverse_ Posted April 30, 2022 Report Share Posted April 30, 2022 The 3.25 volts on the purple is normal standby voltage. Try check red and black in the bottom picture is not shorting. Quote Link to comment Share on other sites More sharing options...
MadMartigan Posted May 1, 2022 Report Share Posted May 1, 2022 I’m not able to read the topic because of huge font. Is it just me? 1 Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted May 1, 2022 Report Share Posted May 1, 2022 What voltages have you got on the Gray and Green wires? On the green wire you should have around 3 volt The Gray wire (the one closest to the heat sink ) should get around 3 volt when you press the power or eject button. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing 1 Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted May 1, 2022 Report Share Posted May 1, 2022 10 hours ago, MadMartigan said: I’m not able to read the topic because of huge font. Is it just me? I can read it ok, Just use the slider below each line of text. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing 1 Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted May 1, 2022 Report Share Posted May 1, 2022 19 hours ago, MadMartigan said: I’m not able to read the topic because of huge font. Is it just me? I reformatted the original post to make the text a smaller / normal size. P.S. I'm not sure how to remove the grey/light blue box that appears at the top of the original post. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.