Jump to content
OGXbox.com

Xbox no display, if it does scrambled splash screen the freezes


retrobear
 Share

Recommended Posts

It's a chipped (Aladdin Advance) Rev 1.0 OG Xbox. It's quick soldered (not using the pins, D0 grounded to (https://imgur.com/a/jdytwmN), I removed clock capacitor as well it didn't leak. I tried it without the chip on. Same problem. Put new thermal paste on both cpu and gpu. Same problem. I don't know if it's the modchip or the Xbox is actually broken.

Link to comment
Share on other sites

If the Xbox boots from the modchip, I don't believe it's the modchip causing the problem. 

There's something wrong elsewhere with the console.

 

Edit: Post a picture showing the entire motherboard and another of the large electrolytic capacitors installed in the area below the CPU heatsink and by the motherboard's power supply connector

Link to comment
Share on other sites

On 3/7/2022 at 5:41 AM, retrobear said:

It's a chipped (Aladdin Advance) Rev 1.0 OG Xbox. It's quick soldered (not using the pins, D0 grounded to (https://imgur.com/a/jdytwmN), I removed clock capacitor as well it didn't leak. I tried it without the chip on. Same problem. Put new thermal paste on both cpu and gpu. Same problem. I don't know if it's the modchip or the Xbox is actually broken.

Was it working correctly (at least booting with the animation ) before you fitted the mod chip?

 

Cheers

SS Dave


Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.
 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.