MadMartigan Posted February 26, 2022 Report Share Posted February 26, 2022 (edited) Just installed an Aladdin in a perfectly working 1.6 because I was bored. Install went smoothly and connections are great throughout. However, I’m getting the three boot cycle and then black screen with no audio or video. Any help would be appreciated. I have all day to fiddle with it to try and fix things. I did not cut the L trace and instead have connected to the right leg of the accessible transistor on top to prevent the led from always being on when power is connected. I can’t post a pic because they all end up being over 2mb. Edit: everything stills works as normal with the chip removed from the header so nothing is screwed up internally. I’m thinking maybe a bad chip? Edited February 26, 2022 by MadMartigan Quote Link to comment Share on other sites More sharing options...
MadMartigan Posted February 27, 2022 Author Report Share Posted February 27, 2022 PROBLEM SOLVED Can delete thread Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted February 27, 2022 Report Share Posted February 27, 2022 9 hours ago, MadMartigan said: PROBLEM SOLVED Can delete thread What solved the problem? Knowing it may help others in the future finding themselves in the same situation. Quote Link to comment Share on other sites More sharing options...
MadMartigan Posted February 27, 2022 Author Report Share Posted February 27, 2022 As you can see in the second picture, I somehow missed connecting the D0 pads on the rebuild board. My old eyes just missed it. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.