datura Posted February 17, 2022 Report Share Posted February 17, 2022 My OpenXenium came in the mail today and I'm looking forward to installing it in my 1.6. I currently have Rocky5's Softmod running, with a 500gb SSD installed. My concerns are that I can't get a clear answer on if I need to remove my softmod before or after the installation, how I go about that, or if I even need to remove it at all. I'm a bit of a chip noob so I don't have much of an idea as to what I'm doing past the soldering. I have about 250gb of games on my F drive which I would like to not transfer over again. Any help is greatly appreciated. Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted February 18, 2022 Report Share Posted February 18, 2022 I doesn't really matter what order. If it was me fit the mod chip and when it boots to the Open Xenium menu with the Eject button you will know the mod chip is working. Then you can load the install disk in the DVD drive and select a BIOS file to boot the Xbox to load a install disk like the OGXbox 2021 installer and use that to remove the soft mod. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.