Xbox2001 Posted February 15, 2022 Report Share Posted February 15, 2022 I’ve recently installed an Aladdin mod chip in my original Xbox after it stopped showing a video output. I am assuming that it was the original tsop chip that had died on the motherboard and therefore installing a mod chip would be able to successfully bypass it. However after installing the mod chip it won’t get past the initial boot screen. It just loses video output and then comes up with error 21. (It also doesn’t always boot successfully after pressing the power button, sometimes there is just no video output) Pretty sure it’s a version 1.4-1.5 For the Aladdin install I’ve soldered d0 to ground and bt on the chip to ground on the chip. Does anyone have any suggestions to get it working? Quote Link to comment Share on other sites More sharing options...
sweetdarkdestiny Posted February 15, 2022 Report Share Posted February 15, 2022 Boot an Installer DVD and cold boot with the DVD already in the drive and flash a bios. After that set up your HDD (The OGXBOx Installer offers the option to just set up C, E or C & E only in case you already have games on F / G. That way you can keep them (The F & G will not be touched). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.