Jump to content
OGXbox.com

Xblast Lite in v1.0


Mave_rick
 Share

Recommended Posts

Hey guys, 

Happy near year, hope you all enjoyed some time off and got some gaming in!! 

I have a new xbox v1.0 that I have installed a Xblast Lite modchip with a 2Tb sata HDD, all is working OK I think.

But just confused as to the best bios to run on each of the banks, it has the 512kb and 256kb bank, correct? 

Also using the 2021 installer disk how do you chose which bank to flash a different bios onto? 

Cheers, 

Bryce

Link to comment
Share on other sites

I would suggest the X2-5035.67 for the 512kb and the Ind5004.67 for the 256kb bank.

The Xblast Lite has it's own flash section and you can use the net flash option to flash the banks from your PC.

x2.5035.bin

iND-BiOS.5004.67.bin

You will also need the config files.

x2config.ini This is copied to E drive root directory

ind-bios.txt This is copied to C drive root directory

 

 

Cheers

SS Dave


Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

Link to comment
Share on other sites

3 minutes ago, SS_Dave said:

I would suggest the X2-5035.67 for the 512kb and the Ind5004.67 for the 256kb bank.

Thanks so much, is the easiest way to ftp the bin files to the xbox and use the XblastOS to flash each of the banks from the files on the HDD? 

Also does each bios run the same dashboard in the same location? 

 

Cheers 

Link to comment
Share on other sites

38 minutes ago, Mave_rick said:

Thanks so much, is the easiest way to ftp the bin files to the xbox and use the XblastOS to flash each of the banks from the files on the HDD? 

Also does each bios run the same dashboard in the same location? 

 

Cheers 

If you can FTP the bios files to the Xbox you can use the net flash option. If you are ftping the bios files make a directory on C drive called bios and put them there.

Both the config files can be edited with notepad to select what dash and location it looks for 1st.

Here is a example of the Ind config file for the default dash

DASH1=\Device\Harddisk0\Partition2\1evoxdash.xbe
DASH2=\Device\Harddisk0\Partition1\Apps\XBMC4Gamers\Default.xbe
DASH3=\Device\Harddisk0\Partition1\Dash\EvolutionX\evoxdash.xbe
DEFAULTXBE=\Device\CdRom0\default.xbe

Partition 2 is C drive and partition 1 is E drive

 

 

Cheers

SS Dave


Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

Link to comment
Share on other sites

1 hour ago, SS_Dave said:

Both the config files can be edited with notepad to select what dash and location it looks for 1st.

Sorry for the questions, I am just starting out, so still a n00b. 

Does it look for DASH1 first, then if it's not found, it moves to DASH2? 

So depending how I config those txt files, I could either have each bios running the same dashboard , or each bios has a different dashboard? 

Link to comment
Share on other sites

15 minutes ago, Mave_rick said:

Sorry for the questions, I am just starting out, so still a n00b. 

Does it look for DASH1 first, then if it's not found, it moves to DASH2? 

So depending how I config those txt files, I could either have each bios running the same dashboard , or each bios has a different dashboard? 

Yes, the dashes will be prioritized. You've got it.

As long as your dash settings are identical, they will share the dash. But you can load whatever dashes you want independently as long as your paths are right.

Edited by Bowlsnapper
Link to comment
Share on other sites

1 hour ago, Mave_rick said:

Sorry for the questions, I am just starting out, so still a n00b. 

Does it look for DASH1 first, then if it's not found, it moves to DASH2? 

So depending how I config those txt files, I could either have each bios running the same dashboard , or each bios has a different dashboard? 

Yes that is correct, so you could have the 512kb bios loading xbmc4gamers and the 256kb loading Emustation or they could both load the same dash.

 

Cheers

SS Dave


Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

Link to comment
Share on other sites

Thanks for all your guys help!! Both bios banks are now loading the EvoX dashboard. 

Another quick question, I had used the XblastOS and the dashboard settings to adjust the fan to 40% and it runs fast while in the dash, but as soon as a game loads (Halo 2) the fan reverts back to slow speeds. 

How do you make the fan speed permanent? Can it be editing in those txt documents? 

Link to comment
Share on other sites

For the Ind bios look for ""FANSPEED=10            ;Fan Speed   10-50 = 20-100%                Default=10"" in the ind-bios.cfg file

And the X2 look for ""; speed of xbox fan, value 10 equals 20%, value 50 equals 100% fanSpeed = 15"" in the x2config.ini file

 

Save the config file to your PC edit the file then FTP back to he Xbox and reboot.

 

Cheers

SS Dave


Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.