alfredo2 Posted August 7, 2021 Report Share Posted August 7, 2021 How exactly would I restore the cut L frame on a 1.6/b xbox. My friend tried to install a wire over the cut but it seems to have shorted out and left a black mark on the motherboard. It is cut the same as in this photo. Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted August 7, 2021 Report Share Posted August 7, 2021 Solder a 26 to 30 AWG wire to the two vias that are circled in the photo. Quote Link to comment Share on other sites More sharing options...
alfredo2 Posted August 7, 2021 Author Report Share Posted August 7, 2021 Thanks once again Kaos! Quote Link to comment Share on other sites More sharing options...
Mu. Posted August 10, 2021 Report Share Posted August 10, 2021 There are also pads on the underside of the board which correlate to those two vias if they prove difficult to solder to. You'll need to use a multimeter to find these as I no longer have a 1.6 to refer to myself. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.