By Johny white
I've got a 1.1 XBOX, made October 2002. I soft modded it using Rocky5 files and then did a TSOP flash with EVO X with F & G. All went well and I next tried to upgrade the HDD from the stock one to a Segate 2TB after upgrading the IDE cable to 80 wire one. I tried the first adapter from the top of the picture you see below but the XBOX didn't see the HDD, so then I tried the second adapter (middle one). The XBOX saw the HDD and HeXen 2018 loaded up from disc, it installed all the dash/app files, then usex XB Partioner to split F & G into equal sizes 926GB (approx if I recall from memory).
At this point everything was going well and the XBOX would boot fine into dash, I even managed to transfer some games and then started installing XBMC and some emulators, during this the XBOX seemed to freeze and not respond. I rebooted the XBOX but it kept giving me error 7 and sometimes error 9. I tried everything possible including formatting the hard drive on the PC and reconnecting, tried other hard drives but all gave the same result. I then tried the first adapter from the top and the XBOX would boot but won't run anything from the DVD drive.
Finally I bought the third IDE to SATA adapter, third one at the bottom of the picture and this arrived today This sadly has not changed the outcome and I continued now to get error 7 with all 3 different adapters
With all this mentioned, the XBOX boots fine into dashboard with the original hard drive and current EVO X BIOS flash. I've also tried all jumper settings on both second and third adapter that has jumper pins.
At this point I'm lost to what is the problem, could I just possibily ended up with 3 bad Chinese IDE to SATA adapters? I've ordered StarTech.com 40-Pin IDE PATA to SATA Adapter Converter and this will land in the next day or two for me to test.
Any input on this would be appreciated.
So, I'm an old man and I can't remember how I flashed this XBox years ago. I have an Aladdin XT Plus2 with Evox +3935 and M8plus_16 fan 40.06 (not sure what size bios that is). I wrote a 2TB image to a drive and get an error telling me to upgrade to LBA48 ver 2. Can someone point me in the right direction. I do have FTP access to the box.
I was given two broken original Xbox consoles to try and fix. After fixing the issues with one of them, I tried to test it. As I didn't have a controller for it I bought an adapter like the one in the picture (Adapter) to try and use either a USB arcade stick or one of my wired controllers for PC, Xbox 360, or Xbox One. I eventually bought a controller for it as I could not get anything to work with this adapter. So I am wondering, does this adapter serve any purpose? Has anybody gotten an arcade stick kit like the one in the second picture to work on the original Xbox?
Board Life Status
Board startup date: April 23, 2017 12:45:48