Jump to content

Aladdin XT: Need More Info About This Modchip.


Recommended Posts

Hi;

About two years ago I bought this used ModChip for 10 USD, but I really don't know what kind of Aladdin version is, It's my knowledge that Aladdin ModChips have a lot of versions so I need your help people to identify it, and if you can or have it, I need install instructions too, please, I remember that this chip can be compatible whit all motherboard versions of original Xbox, and I remember that actually we don't need too much points to install this kind of chip (Aladdin) to make all the steps for have a mod original Xbox because there's no more Xbox Live (for example) for this wonderful console, but I'm only speculating based in my memories, you're the experts, I really appreciate your help and time :)

IMG_20180714_182657089_HDR[1].jpg

IMG_20180714_182708126_HDR[1].jpg

Link to post
Share on other sites

Thats the aladdin xt plus 2 model 4064 the least common of the two is the 4064 model the 4032 ones are easier to find it appears that there are some clones of the 4032 model i have yet to come across an actual clone for the 4064 im currently trying to figure out where to find an LCD wiring guide for the 4064 here is a little more info as far as specs go from a site that still sells the chip https://www.modchipcentral.com/store/XBox-Aladdin-Advance-XT-Modchip-PLUS2-USA/CANADA.html

Link to post
Share on other sites
7 hours ago, Noxious Revenger said:

Thats the aladdin xt plus 2 model 4064 

The 4064 model has Lattice LC4064V chip on it, and a bit different circuit, the one posted by OP, is 100% Aladdin XT Plus 2, their installation should be quite identical, as long and they have the same exact peripheral connections.

  • Like 1
Link to post
Share on other sites
10 hours ago, JulioFrausto1994 said:

Uhmmm, thanks for the info guys!, fortunately I still have the phone number of the seller, I ask him for more information about the chip and the install instructions and eventually he'll send me a personal tutorial :) and obviously I'll share it with the community , thanks again UwU -JulioFrausto1994

this is a good guide on how to install it just make sure what version of xbox you have as it is a little different for different versions

 

  • Like 1
Link to post
Share on other sites
On 7/19/2018 at 10:42 AM, ironsniper1 said:

this is a good guide on how to install it just make sure what version of xbox you have as it is a little different for different versions

 

That video is specifically for a 1.6 installation, which is very different from the installation method for all other revisions. This video should not be followed at all if you are trying to install on a 1.0-1.5.

  • Like 2
Link to post
Share on other sites
On 7/22/2018 at 7:34 PM, JulioFrausto1994 said:

Today I just ordered my brand new Quick 861DW Hot Air Rework Station and Hakko FX888D-23BY so as soon as I get it, I'll post my progress and results with this manuals, thanks again guys, aprecciate it so much!

sweet dude, i used a bic lighter during my aladdin install.

Link to post
Share on other sites
  • 1 year later...

you all make me drool as i used generac 2 station hot air with 80 watt variable soldering iron at about 355 fairenhight for soldering that puppy made me sweatt oldster here but still steady hand just big heads up 7.0 magnifier stero scope version from when i did smd work and checking in clean room what is the best mod chip to get now for version 1.4 gonna reuse it back up as retro -emulation for gran nephews-nieces dureing this c-19 head ach give my nephews and nieces some sanity...

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By Chungaloid
      Hey all, I recently ordered a 1.0 motherboard and hdd off of ebay and went to mod it.  Before modding, I booted them up and found them to be working properly.  The clock cap was leaking bad so I replaced that.  I soldered up the pin header to the LPC, connected a wire to the D0 pad and routed that to the Open Xenium I have, and went to boot it up.  I'm greeted with a solid red LED on the modchip, and the xbox booting up into the normal bios.  Attempting to boot into XeniumOS by pressing the eject button yields the same results.  This modchip did originally come out of a 1.6, flashed with Evox M8+ 1.6. 
      Just to rule out the modchip going bad on me, I wired it back up into the 1.6 and it booted perfectly.  I threw an Aladdin chip, that's also flashed with Evox M8+ 1.6, into the 1.0 also, and it will not boot into custom bios either.  I've reflowed my joints multiple times, and my D0 solder job is good (I believe lol), so I'm really not sure what's going on.  Any tips would be greatly appreciated.  LPC solder joints have been reflowed like 4 times so they look bad lol, forgive me.

    • By ScottSchods
      I have a Jet Set Radio Future save that I have played around 25 hours in that I would like to be able to play on my console, but I haven't been able to figure out how to resign the save. The save has an "error reading JSRF save data" and doesn't let me use my save. The save originated in Cxbx-R and it won't allow me to move the save to or from the console without this error occurring. Not sure how to proceed from here, and would be grateful if anyone wanted to help me out. I have attached the save if that can help, thanks for your time.
      5345000a.zip
    • By geohunk
      Hi guys,
       
       So I was given an Xbox 1.0 from a friend that is chipped and has a 120gb HDD. Unfotunately the chip does not have support for HDD larger than 120gb and I am unable to flash the chip's BIOS (evox says it is not flash writeable).
       I'm basically in a bind to find a guide on how to softmod this box and tsop it from a modchip because I don't know what type of chip it is and how to disable it. Pictures below: 
      Apologies for the very dusty MB, lol! As always any guidance will be highly appreciated.
       

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.