Jump to content
OGXbox.com

Question regarding 128mb ram upgrade and xblast bios


hands_groober
 Share

Recommended Posts

Hi

Im in the process of upgrading my ram. The mod chip im using is an x2.6 with ind-bios. I have the xblastos xbe installed on my HDD.

My thinking was that I could boot to my dashboard then launch the xblastos xbe to check each ram chip. However, upon powering on the xbox, it boots three times and the led's flash red and orange.

My question is do I need the xblast bios flashed to my modchip for the xbox to boot during the upgrade or have I made a mistake during the installation?

Im quite confident about my soldering. Checking under x60 magnification and lots of light

tia

Link to comment
Share on other sites

Yes you need Xblast on a modchip set as the default.

A Xbox will not boot until it has 128meg or 64 meg of ram so if one or more chips is not working it will FRAG

 

Cheers

SS Dave


Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

  • Thanks 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.