C64MidRezzie Posted May 1, 2021 Report Share Posted May 1, 2021 Upgraded to SATA drive - using 80 pin and Startech Ide to Sata - have the Startech on cable select - after the clubbed I get error 11 - tried master as well - cable loads older 250 ide cable - I’d say the adapter but I locked the drive using h it in an ok’d ide pc and it worked fine - I’m totally stumped and would really appreciate your expert advice - thanks! Quote Link to comment Share on other sites More sharing options...
sweetdarkdestiny Posted May 1, 2021 Report Share Posted May 1, 2021 Error 11 = DVD Drive not found. Check your cables on your DVD drive and the mainboard. Some times the yellow wire didn't make a good connection or just comes loose. And consider flashing a noDVD drive bios. Quote Link to comment Share on other sites More sharing options...
C64MidRezzie Posted May 1, 2021 Author Report Share Posted May 1, 2021 It works with philips dvd drives but Samsung’s return error 11 unless I keep pressing the eject button until The word ‘Microsoft’ appears then it works - any ideas? Thanks Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted May 1, 2021 Report Share Posted May 1, 2021 Is it a WD green hard drive? Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.